Okey Dokey guys; I haven’t posted in a longg time >.< but tomorrow I will upload a long wassup post. But for now I give you a fan art portrait that I spent about 20 hours on:
My first time really ever doing something like that..
Talk to you guys later, oh and thank you so much for all the views recently! <3
A few days ago I had the wonderful joy of going into NYC, I wanted to go to the FIT art store that I adore and Mood (the fabric store used in project runway!) I needed fabric for my Hanyuu costume which I am going to talk a bit about before getting into how my trip went. I got all the fabric I needed for this dress, though i’m buying the top part pre-made off of ebay because it’s pretty, cheap, and much better then I could do.
I only just not realized that Hanyuu doesn’t wear a skirt. She wears a Hakama (blehh) which is really floppy pants which I am so not looking forward to making :[ I'm also working on her horns which I will post a tutorial for later. But anyway, I got fabric at mood. And a few Tria markers at the art store...mmm so many color it was like heaven I ended up just picking out 3. And I haven't really used them enough to tell you what I think.
So then we went to my dads friends apartment and to Chipotle for dinner (Yum) And after that we went to see the Christmas windows. We started with the Lord & Taylor windows and they were...really bad, I hated the way the dolls were done they were creepy and the girls looked like guys. And the way the arms were done they looked broken..it was badddddd. The Macy's windows were odd, I didn't care for the style it was done in. They tried to tell a story with 4 windows and it just didn't work well. Here are a few crappy photos of them, I just had my little point in shoot with me so yeah don't expect good photos in this post XD
Now the windows I LOVED were the sacks ones..they were just stunning Sadly I couldn't get very good photos of them :'( But I tried!
So those were kinda cool, the mannequins were really realistic (it was creepy...in a good way) Then we saw the big tree which was very pretty...but just a big tree..meh It was SO crowded like seriously where your being pushed on by the crowd.
Sorry for the blurry photo...it was so crowded >.<
OH one more thing, I thought these were really neat the store looked cool too but we didn't go in. You see one is made out of slippers the other out of socks and the other out of pillows. :]
Then we went back to the lounge and had the most amazing hot chocolate ever :3 It also had really cool modern lighting.
So that was my trip..not super exciting but yeah d:
Hey guys! I haven’t posted in a while..but I went into the city recently and should have photos from that up soon. But for now I leave you with this tutorial I made on cosplay.com after so many people asked me how I made my black rock shooter sword I decided to make it ^^
this is what i have been working on the last week…..
1. Cardboard & paper 2. After I put expanding foam on 3 &4. Carving process 5. one side done.
1. Masking tape over it 2. Wet newspaper confetti 3. Dry newspaper 4. dry paper mache
Oh my, this has become far more popular then I had even anticipated. Because of this, I’m going to rewrite parts of this so it makes a bit more sense.
Before I really get into it I would like to say; I am not a very experienced (or good) prop maker. I did/wrote this on a whim and my results aren’t that great. But if you put more time into it then I did I’m sure you can get spectacular results!
This is a very easy way to make a lightweight (woodless) prop. It will work best for larger weapons, but I’m sure it could be altered for just about anything. Although this is easy to do, it does take a lot of time (mostly drying time between steps) so it isn’t a “night-before-the-convention” type of project.
-SUPPLIES-
-Cardboard (a smooth sheet as large as you want your prop to be.)
-Pencils/markers
-Expanding foam (I used the brand “Great Stuff” purchased at home depot for $4)
-Craft knife (Or X-acto knife)
- 1″ Masking tape
-Wallpaper Paste (Or tacky glue)
-Newspaper
-Scissors
-Sandpaper
-Plastic cups and spoons
-Celluclay or some sort of paper mache (Mine was purchased from a local craft store [Michaels])
Now that you have collected your materials your ready to get started!
Clicky clicky for original post
Step 1: Designing and cutting your base
You will want to start by sketching out your sword/blade/prop design onto the cardboard. Or, you can sketch it out onto newsprint (or some other cheap paper) and trace it onto the cardboard later. This way you can erase and alter the design as much as you want before even touching your cardboard.
Then outline your sketch in a sharpie, following the lines you like best. (If you drew your design on paper, cut it out and trace it onto the cardboard.
Go ahead and cut around your outline, this can be done with scissors, craft knives, or an X-ACTO knife. Whatever your most comfortable with, and find works best. I used a craft knife and achieved good results, though an X-ACTO knife would probably be better.
Try to take your time on this and work slowly, you want it to be very smooth and accurate to the desired shape.
Step 2:
It’s time for foam! Oh the joys that come with foam. I used the brand “Great Stuff” because it was the cheapest, it comes in cans that look very similar to spray paint cans for $3. My sword took around 2 regular sized cans (which was far more then I had expected) so I would recommend getting a lot more then
Well now that you have your cardboard base their is nothing stopping you from using foam! foam time! I use the brand “Great stuff” because it’s the cheapest, my home depot sells “Large” cans (about 4″ taller then the average spray paint can) for $3.50, it took about 2 regular sized cans for my sword so i’d recommend getting a lot more then you expect to need. (And some cans come broken and won’t spray, another reason to always get extra!) I’d recommend wearing gloves, the foam doesn’t smell at all but it does get all over the place so i’d recommend doing this in a garage or outside and then moving it inside. Or just lay down a lot of newspaper, and wear ‘cruddy’ clothing you don’t mind wrecking. Then simply shake spray the foam all over your cardboard, I like to hold the can about an inch from the cardboard and go quickly making sure EVERY part of cardboard is covered. Then spray water all over it, since the foam dries in humidity the water will make it dry faster and poof up more.
Step 3:
Lah de dah, waiting, waiting. The foam takes about 3 hours to dry TO THE TOUCH it says 15 minutes on the can, but the 3 times i’ve worked with it it’s taken between 2-3 hours. Then you can flip it over and spray the other side.
Step 4:
Waiting, waiting lah de dah! After about 8 hours your foam should be totally dry! Now you can start carving! I use a craft knife for all my carving; be warned this is dangerous a lot of the time your carving toward yourself and you need the knife extended all the way out so the blade is about 4″-5″ long.
You can also use an X-ACTO knife or any type of knife your comfortable with, craft knifes seem the easiest and safest to me. Then jump on in and carve! Don’t be scared..you can always add more foam if you need to, I spent about an hour staring at mine before I gave in and carved xD
Step 5:
Whoo! your done carving, for this project it took me about 6 hours of carving which I did in two sessions (why yes i am a slow poke!) Now your gonna wrap your entire sword/blade in masking tape. Masking tape is the brownish yellow stuff that comes in 1″ or 3″ thicknesses at home depot. I’d say start with the 1″ thickness, it may take longer but it’ll look a lot smoother.
Step 6:
Now find a TV show or turn music on, something to amuse you well you cut hundreds of little 1″ x 1″ squares. This doesn’t take to long but make sure you have lot’s of extra’s. I like using confetti more then strips, it just seems easier, and less messy.
Step 7:
Now you get to make your concoction >:], it’s pretty much 1 cup of water and 1/3 a cup of wallpaper paste (or glue). But wallpaper paste works better, you can add more if you want there’s no “exact” amount but keep in mind that it will be sticker and harder to work with the more glue you add. Mix like a lot, and regularly throughout using the mixture.
Step 8:
Paper mache time! woot! This can get very messy, so lay down lot’s of newspaper or work in an area that can be cleaned easily. For those who don’t remember how to paper mache things, or have never done it before, it really is super easy. You’ll just want to dip a piece of confetti’d newspaper, stick it to the sword/blade/whatever your working on, and smooth it over with your finger. And of course, repeat a few hundred times until your prop is covered. I know this step seems a bit pointless, but it is really important.
Step 9:
Now you can either decide to be patient and let it dry naturally (which can take several days) or you can pull out a heat …or hairdryer. With a heat-gun you must be very careful you don’t light it on fire – this is not the look your going for- or maybe it is it’s not the look I’M going for! I just used a cheap hairdryer on high and it worked pretty well. It took me about 15 minutes to dry one side.
You know it’s dry when the newspaper turns white, or at least obviously lighter then it was when it was wet. (You’ll see a big difference) Once it turns white stop drying it, wait an hour or so and home back. The newspaper should be gray again because the moisture underneath is coming to the surface. Go ahead and manually dry it again, then flip it over and do the other side. After that’s done leave your “masterpiece” overnight. It should be fully dry in the morning, but it depends how many newspaper layers you used, I used one and it was fully dry the next day.
Step 10:
Well now it’s time for a different, much more disgusting type of paper mache, it’s the pulp type you add water to. I’m going to tell you outright to completely ignore the instructions. Put the powder in a cup and add water until it turns into something with a consistency similar to clay, then add a spoon full of glue. Add more pulp if needed until the mixture resembles clay that won’t stick to your hands. I used the brand Celluclay because it was the cheapest (About $25 for 5 pounds at Michaels which I got 40% and $3 a pound is a REALLY good deal). But I suppose any type would work.
Step 11:
Once it feels like clay you can start putting it on you prop. I would put a big glob on mine, then smooth it out with my fingers and water.
Once it’s as smooth as you can make it squirt water onto it and smooth some more. Repeat again, and again until the entire prop is covered. Once again it’s time to dry, you can use a heat gun/hair dryer to dry it but be careful throughout doing this. Make sure you dry it until it turns a lighter color and then STOP, otherwise it’ll crack. Give it an hour and water will seep to the surface and then you can dry it again.
Then you can sand and paint your sword. You can sand paper mache without issue, but it won’t become smooth, it tends to become fuzzy. Which is actually a good thing, just make sure to paint on a layer or two of primer before doing your actual paint job
I hope that was helpful!
Sorry I haven’t been posting but anyway i’m back with a Soraka league of legends drawing ^__^ This took a good while, but i’m pleased with how it came out :] Sadly i’m sick today D’: It kinda sucks, and I can’t draw anything >.< I’m gonna do fractale drawing videos when I feel better. Even though I HATE the manga I love the drawing style. Anyway, tah dah!
