RSS

Making a Cotton Sateen Regency Bonnet

17 Sep

Usually I post about making a dress, then post about making matching accessories. But today I felt like blogging about making this bonnet, so i’m doing things a little backwards.

I’ve recently finished a regency themed dress made from a red and white floral fabric. I showed a little preview of it in my last progress report, and a blog post about the process will be up in the coming weeks. The dress has a bright print but is very simple in design, which makes it an excellent candidate for accessories. I decided to pair it with a bonnet made from cotton sateen and a pair of white shoes. This post will be about making the bonnet and decorating the shoes.

I’m not very familiar with bonnets from the early 1800s so I did a bit of research. It seems cotton caps were more common than bonnets, but I didn’t think those would be very flattering on me or look nice with the dress. After a lot of searching I found reference images that I liked. The first is on the bottom left of this print and the second is shown here. My plan was to combine the brim from the second image with the cap/banding of the first image.

Here is my sketch illustrating that plan…I draw really badly sometimes.

DSC_6996

The brim and back of the bonnet are made from interfacing with wire in the edges. The outside will be covered with red cotton sateen and the interior will be white. I also chose to make the cap portion flexible and made entirely from fabric, with no base.

DSC_6994

And I have some fake flowers and pearls which I wanted to use as decoration.

DSC_6997

With a bit of a plan in mind it was time to get to work!

I never really know where to start when it comes to bonnets, so I tried to drape the brim shape on a wig head. That process looked a bit like this…

DSC_6999

When it was removed from the form it looked like this!

DSC_7000

I made it a little bit larger to account for the fact that my wig head is smaller than my head.

DSC_7002

And I had a pattern! It looked about right when I held it up to my head, so I used the pattern as a guide and cut out the interfacing. This is heavy duty felt weight interfacing, which i’ve used for headpieces in the past. I should have used buckram, but I still haven’t ordered any.

(it’s on my list, i’ll get to it someday…)

The interfacing sat weirdly on my head, it looked much different and way larger than the newsprint layer. So I cut several inches off each side. I don’t regret doing this, but I wish I hadn’t cut off so much. My bonnet ended up being a little bit too small and sits farther back on my head than I would like.

DSC_7004

Using my sketch as a guide I drafted a back panel which will cup my neck and attach to the brim. This also got cut out of interfacing.

DSC_7005

Then I whip stitched wire to each edge. This allows the bonnet to be shaped.

DSC_7006

To cover up the wire and texture of the interfacing I sewed flannel over the top side of each piece. I did a really awful job of this, but that’s okay, no one will see it.

DSC_7126

The top layer of the back piece are bands of cotton sateen. I made these bands by sewing three inch wide strips of cotton sateen into tubes, then turning them right side out and ironing them.

DSC_7125

The bands got sewn on but I left the top and bottom edge open. The lining got tucked into the open edges and sewn down. Eyelet lace will eventually be sewn under the bottom band, and the top band will hide the raw edge of the lace used for the cap. So  these were left open for the time being.

DSC_7133

This is the interior.

DSC_7131

I decided on the wider eyelet lace since it matched the color of the dress better (the other was a little too yellow) it was pinned underneath the bottom band.

DSC_7135

And all sewn down! It looks a little ripply right now, but when it’s bent more tension is put on the bands and they look smooth.

DSC_7137

I skipped a few steps here, oops The brim was covered with flannel and cotton sateen. Then I cut out a piece of poplin to the same size as the brim with a half inch seam allowance across the bottom edge. I didn’t like how the poplin looked on its own, so I covered it with a gathered layer of silk organza. Then the bottom edge was tucked underneath and pinned to hide the raw edge. Here you can see it pinned in place.

DSC_7013

I whip stitched around the top edge and the sides to secure the layers in place, but I left the bottom edge open.

DSC_7138

DSC_7139

I made a little bit of bias tape (I had maybe an inch leftover when this was done!) out of some lace. I sewed this around the top and side edges to finish them nicely.

DSC_7140

DSC_7141

Now the two pieces were mostly done and could be sewn together. Here they are pinned in place. I sewed them together with thread that was doubled up. I was sewing through two layers of stiffened felt so I used a big needles and pliers to help guide it.

DSC_7142

And when that was done I cut out the cap. I took a few measurements and then guessed what the shape and size should be. Not the most professional method but it worked!

DSC_7145

The bottom edge was gathered slightly then tucked between the top band and the layer of lining. I sewed it in place with small whip stitches.

DSC_7146

Then the top  layers was gathered slightly towards the center and pinned between the brim and the brim lining.

DSC_7147

DSC_7148

Here is a shot of how it looked inside.

DSC_7149

And after everything had been sewn down! After all that work it was finally starting to look like a bonnet.

DSC_7152

DSC_7153

I made up some ties from strips of cotton sateen. These got sewn just inside the interior of the bonnet. And then it was time for decorating!

The roses I planned on using for decorating were a bright orangey red which didn’t really match. So I used a watercolor brush and some copic inks to darken the edges to a deeper shade.The one in the middle/slightly towards the left is unpainted so you can see the difference.

DSC_7010

I glued those on along with the pearly strands of white flowers, and it was done!

DSC_7238

DSC_7243

I think this bonnet is very pretty, and i’m happy with the shape and construction. But I made it too small, so I don’t love how it sits on my head. I also need to add another tie, or combs to the back because it is really unflattering on my jaw when it is tied tightly, but it tends to shift and fall when it’s tied loosely.

I attempted to take photos of this worn but the lighting went to crap and I didn’t end up with usable images. But I did get a bit of video footage of me wearing it (I was filming it for a costume spotlight) and that can be watched here!

Now onto the shoes. I actually plan on making a pair of Regency slippers from leather and velvet in the near future, since I want them to match a dress i’ll be starting soon. But I didn’t make these shoes, I bought them from amazon, you can see the listing here.

They aren’t very comfortable or well made, but for $18 I wasn’t expecting a lot. I bought them because I really liked the pointed toe, and found the silhouette to be quite similar to shoes from the early 1800s.

DSC_6995

Funnily enough the model of these shoes is “Angie – 18” which is my name and current age, which is kind of a weird coincidence!

DSC_7011

I made some bias tape from cotton sateen. It was folded in half and glued down around the foot opening with the creased edge being visible. I used E6000 to secure it and a few dozen binder clips to keep it in place while the glue dried. The raw edge was trimmed with pinking shears and dipped in fray check to prevent it from unraveling in the future.

Then I made cute little bows for the front.

DSC_7217

Here they are with the bows attached! I glued on some of the pearl/white fake flowers as well. I’m really happy with how these look.

I just wish I had used a little more precision with the glue gun! There is some visible glue which i’m not very proud of. I might try and fix that in the future, but even if I don’t it’s not a big deal. I doubt anyone will be getting that close to my feet, or even see these underneath my dress!

DSC_7221

DSC_7245

And that’s it for the accessories! I’ll talk about the dress that goes with them soon.

Thanks for reading!

 

Tags: , , , , , , , , , ,

7 responses to “Making a Cotton Sateen Regency Bonnet

  1. Colleen

    September 17, 2015 at 7:24 am

    Don’t worry about seeing the glue. When I worried about that stuff my mother would always say, “Anybody gets that close to your feet, they’re drunk. Get away from them.”

     
    • Angela Clayton

      September 25, 2015 at 2:26 pm

      Haha, true words of wisdom! And completely true – i’d probably have other things to worry about if someone was inspecting them closely enough to see the glue!

       
  2. Lana

    September 17, 2015 at 10:12 am

    Hi Angie, you are very talented! I found you on Pinterest and I’ve been following you for a couple of months and I just want to say that your creations are very entertaining! Your Alice dress ensemble is amazing and so pretty!
    About the bonnet, here’s my two cents: The white eyelet part, I think, and this is just my personal opinion, that the shape is wrong. Did you use a pattern? It should look like half a circle but a bit longer. Also, the cotton stripes you used for the back support should have elastic inside. I’m not a bonnet maker and I had to figure out how to make one on my own also but this is what worked for me. Here’s mine:
    https://www.etsy.com/listing/98242490/toy-story-little-bo-peep-inspired-sassy?ref=shop_home_active_16
    Keep up the good work! Lana

     
    • Angela Clayton

      September 25, 2015 at 2:25 pm

      Thank you, and thank you for the advice! This bonnet is a bit different than more modern one that you linked. Hard shelled bonnets were usually made without elastic (secured with ties and pins) which is why I didn’t do that. And egency bonnets have really small brims which is why I didn’t use the more popular half circle type of pattern – that would be to big for this era!

       
  3. henrietta hudson

    September 18, 2015 at 4:54 pm

    I think your work is marvelous. I’ve been sewing for forty years and have not done what you have done. Keep up the excellent work.

     
  4. JessicaRose

    September 21, 2015 at 8:40 am

    I’ve been following you on Tumblr for a long time. Your creations are always amazing!

     

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: