RSS

Making an 18th Century Riding Habit / Riding Jacket

26 Feb
Making an 18th Century Riding Habit / Riding Jacket

I’ve been in a pretty serious relationship with this garment for the past three months so i’m really excited to FINALLY be sharing the process and finished piece with you guys.

This is going to be a really long post so i’ll start with an image of the finished product, hopefully that will give you the motivation needed to make it to the end!

Isn’t it beautiful?

DSC_4155

Let’s go back to the beginning. At the start of 2015 I came across this painting of Sophie Marie Grafin Voss by Antoine Pesne and I fell in love. I’ve always been a fan of the structure and details on 18th century riding habits, but i’ve never seen an image of one that really inspired me until I came across this.

Although the beading and details are beautiful, they are also ridiculously impractical, as are the short sleeves and deep neckline. But that’s what I like about it. It’s very different from most of the riding habits* you see and it perfectly combines the traditional frills and details you’d find in an 18th century women’s wardrobe with the very structured menswear inspired design that riding habits are famous for.

So I decided to make it something similar to it.

 *This isn’t really a riding habit. I’ve titled this post that way because it’s the most common term for riding jackets which is what this garment actually is. Riding habits were a combination of matching garments worn for riding. This is just a riding jacket paired with a more traditional 18th century dress.

In December I finally began work on the piece.

The first step was drafting the pattern. This was surprisingly easy since I used the pattern I made for the bodice that goes underneath this jacket as a guide. I changed up the seaming a little bit, lowered the neckline, added larger seam allowances, lengthened each piece by a lot, and made the pieces wider to the bottom so the skirt of the jacket would have a lot of volume.

I also changed the pattern to have a front closure instead of back laces, since those obviously wouldn’t be appropriate for a jacket!

This is the altered front panel.

DSC_0198

Side panel.

DSC_0197

And back.

DSC_0196

I did not make a mock up for this jacket. Mostly because I didn’t have any fabric around that was thick enough to create an accurate mock up (muslin does not lay the same way as heavy wool). But also because I was feeling pretty confident about the pattern since the bodice I based it off of fit really nicely. And since the jacket was patterned with 3/4″ seams I could let it out pretty significantly if it was too small, and I could always add gores to make the skirt of the jacket bigger.

So I laid all the pieces out onto my wool melton fabric and cut them out. I packed the pieces as tightly as I could on the material since I was a little bit worried that I might have to recut some of them and wanted as much material as possible to be left over.

DSC_0200

Front panels…

DSC_0202

Side panels…
DSC_0201

And the back panels.

DSC_0204

I sewed together the back panels first, backstitching and cutting the thread just below the waistline so the bottom eighteen inches of the seam was left open. The seam was pressed and the unsewed edges were folded inward by three quarters of an inch. Then I sewed the edge down so there was a finished slit at the back of the jacket.

DSC_0205

Then the side back seams were done up. I was really pleased with the draping at the back, even though it looks a bit wonky on my dress form.

DSC_0206

I pinned the shoulder and side seams up and did a quick fitting of the jacket overtop of the panniers and stays. It fit well enough but there was a lot of bunching at the waist since I hadn’t accounted for the angle of the panniers. This was easy to fix, I just added a horizontal dart to the waistline.

DSC_0207

After another fitting I felt comfortable moving forward. The jacket seemed really large at the side seams but I didn’t want to take it in right away since I knew the embellishments on the front of the jacket would stiffen it significantly and change the ease and fit of the front panels.

I drew the trim pattern onto the front panels with chalk. Unfortunately I couldn’t get them spaced perfectly, or as far apart as they were in the reference photo.

After another fitting I realized the lace needed to extend farther down. If i’d noticed that initially I could have spaced them farther apart and made them look a lot better. But I didn’t. And by the time I noticed the problem my only option was to add a sixth strip of trim to each side.

DSC_0208

Speaking of the trim! The one i’m using is from the seller LaceTime on etsy. It was four bucks for two yards and I used four yards in total. Traditionally braided trims and cords would be used on riding jackets but since this one is so fancy I decided to go with lace instead.

I should also mention that I chose to make the detailing of this jacket gold instead of silver (which is the color it probably was) because I thought it looked more striking against the red.

DSC_3228

Here the lace is sewn on to one side, and pinned to the other. Since the spacing was off on my jacket this lace ended up being too wide. So I folded the edges inward to keep it inside the lines I marked.

I may have accidentally sewn some of this lace on upside down and not noticed until the jacket was almost finished. Oops.

DSC_0210

Since the edges of the lace were folded over they looked really bulky. The lace also wasn’t super even since it was difficult to precisely fold the edges over. The end result looked pretty sloppy, and I wasn’t happy with it at all.

So I decided to add an extra step to the embellishment process. I densely stitched sequins around each edge of the lace and overtop of any gaps in the lace where the base was visible. I did this with red thread so it would blend in with the material and better integrate the lace with the  fabric.

DSC_0252

This took forever. So many sequins went into this. Each piece of lace took around two hours to embellish, that’s more than twelve hours of sequining just on the front panels! But it looked beautiful and added a lot of depth to the lace.

DSC_0253

Then the beading began. For this I used two different sizes of gold seed beads and beige colored thread. I followed the pattern of the lace, stitching between the covered cord that makes up the design.

DSC_0292

This is when the lace really started to transform. Above you can see the difference between the side that has beads sewn on and the side without. These really changed the color of the lace, and added a lot more depth and texture to the piece.

DSC_0295

Once I was done beading the lace I tried the jacket on. Here it looks really bulky since I had tons of excess fabric pinned into the side seams but you can get a rough idea of how it was looking.

I also did a test for pocket cover placement, which is what that funny thing on the right side is supposed to be!

DSC_0297

This fitting made me realize that I had to take the waist in by more than two inches and fold the front edge over by two inches instead of the planned one inch. Guess my worries about the jacket being too big were for nothing!

DSC_3241

With the body of the jacket coming along well I drafted a sleeve pattern.

DSC_0301

Then those were cut out and I used chalk to mark the trim placement on them.

DSC_0302

The lace was pinned, then sewn on.

DSC_0303

And sequined, then beaded with the same technique use on the front of the jacket.

DSC_0790

Here you can see the beading part way done.  Really shows how much the beading transforms this lace!

DSC_0791

With the lace completely beaded I moved onto the tassels. On the left you can see the four different types of beads I used for each tassel.  All these beads are slightly different in color and finish which makes the tassels look a bit more interesting.

On the right you can se the two different types of beads that were used on the lace.

DSC_0789

Each tassel is made up of eight strands, which are a little over an inch long.

DSC_0877

Finished tassels on sleeves.

DSC_0875

And finished tassels on the jacket.

DSC_0888

To hide the tops of the tassels I added buttons. I realize embroidered buttons are a lot more historically accurate, but I didn’t have enough coverable buttons left and I wanted to finish this project. I’ll probably end up replacing these in the future with something more accurate.

Then again glass seed beads aren’t very 18th century appropriate either but I used plenty of them, so perhaps it doesn’t matter too much!

DSC_0891

Finished sleeves!

DSC_0905

Here are all the buttons sewn onto the jacket.

DSC_0893

Now it was time to make the pocket covers. Which are, like everything on this project, just decorative. I used all but three inches of the gold lace on the jacket so I had to raid my stash for something that would work for the pocket covers. Luckily I came across a different gold lace, which was just the right shape. I used that as a guide for patterning the pocket covers, then cut the covers out from interfaced wool.

DSC_0304

Then the lace trim was pinned and sewed on.

DSC_0305

And the sequining process resumed. These took even longer to do than the trim on the jacket but it sure looks pretty!

DSC_0577

I didn’t like the visible organza in the lace so I covered that with gold seed beads. Then I stitched clear montees into the circular loops of the lace.

DSC_0792

DSC_0794

I sewed the pocket covers onto the front panels and finished them off with a button.

DSC_0895

Here is one of the finished front panels!

DSC_0894

So pretty!

DSC_0899

And all the beaded panels together. I think I spent more than eighty hours hand stitching beads and sequins onto this project. I was sick of it at times but for the most part I really enjoyed the process. I find beading really calming, and I would love to do more of it on future projects.

It also ended up being pretty convenient since I could do it in front of the TV. I worked on this through the first four seasons of Downton Abbey and a bunch of Top Gear episodes.

DSC_0902

I did one last fitting before sewing everything together. I ended up taking it in at the waist a bit more, raising the sleeves at the shoulder, and taking it in at the shoulder. Then I sewed the side seams and attached the sleeves.

DSC_3319

During this fitting I realized the jacket was wayy too long at the back, so I removed more than four inches of fabric from the hem. Then I turned the hem inward by an inch and sewed it in place.

DSC_3321

The cuffs also got hemmed.

DSC_3324

And so did the neckline. Shortly after taking this picture I lined the sleeves and secured the lining to the interior of the cuffs.

DSC_3325

Now it looked like a proper coat!

DSC_3326

I turned the front edge inward by two inches until I reached the waist, the rest of the front panel was only turned inward by an inch.

Then I sewed in the hooks and eyes. THERE WERE SO MANY. I used all the size two hooks and eyes I had, which was 19 in total. They aren’t spaced evenly, so they don’t look too pretty, but they line up perfectly so i’m happy.

DSC_4145

DSC_4146

At this point the coat was wearable, but it still wasn’t finished. I roughly pinned the lining in.

DSC_4147

After making sure the lining wasn’t restricting the drape of the jacket I pinned it in properly.

DSC_4148

And sewed it in place. This lining fabric isn’t historically accurate at all but it makes the jacket much easier to get on and off, and that’s what matters to me!

DSC_4154

And the jacket is finished! I chose not to further embellish the neckline or hem, since I didn’t feel the jacket needed it, and i’m happy with that decision. I really love the way it turned out. I had so much fun beading this, and the fact that the fit turned out so well delights me to no end. I definitely think this is my most successful 18th century inspired garment that i’ve made so far, and it’s certainty my favorite from a visual aspect.

I’m really proud of it. And that’s a nice feeling!

DSC_4156

DSC_4157

DSC_4158

Of course there are a couple things I would change. Mostly the spacing of the lace. It would have looked so much better and been way more flattering if I had spaced them properly and only used five pieces on each side. Then I could have used the full width of the lace and the wider lace would have made my torso look longer and more narrow.

But other than that I think it’s pretty great! Not exactly like my reference photo, but pretty great all the same.

DSC_4155

Divots in the wool once again gahh. Luckily they aren’t all that noticeable when it’s worn.

DSC_4160

Here is a teaser photo from the photoshoot I had with this project. This was my first time wearing the ensemble, and I was rushing because of the snow so I don’t think it shows the jacket in its best light. The bodice was slipping at the shoulders, which caused the jacket to sit lower on the shoulder than it should, and the sleeves ended up bunching. I think i’ve fixed the bodice to rest higher on the shoulders so it should wear much better next time!

I’m also going to (eventually) add buttons to the centerfront of the jacket. That was always part of the plan but I forgot to set aside buttons for it and used them on a different project by mistake!

DSC_348231

So that’s it. It’s always weird finishing a project i’ve invested so much time in (ninety hours!) but i’m looking forward to starting new things. And this beauty has a proud resting place on a hook in my sewing room so I can look at it whenever I like!

I’ll be posting about the dress and the hat soon. Thanks for reading!

 

Tags: , , , , , , , ,

27 responses to “Making an 18th Century Riding Habit / Riding Jacket

  1. Dayna

    February 26, 2016 at 6:44 pm

    If you never told us about your mistakes we would never know they were there. I have learned to embrace the mistakes I have always wanted to do beads or sequins but right now I quilt. Quilts for beds or kids who will drag them around. Keep up the good work. Practice makes perfect.

     
  2. paperballpotluck

    February 26, 2016 at 6:57 pm

    This jacket is amazing!! You are so insanely talented. I love following your work.

     
  3. imnosidekick

    February 26, 2016 at 7:03 pm

    This is my favorite project you’ve done! So much detail on the beading! I would never have the patience (x___x)

     
  4. Ivalerne

    February 26, 2016 at 7:08 pm

    It is beautiful!!! You did a remarkable job. Do you ever sell your items to the theater’s or take special orders?

     
    • Amy Barber

      February 26, 2016 at 9:46 pm

      90 hours for one piece? I doubt they could afford her work! Besides isn’t their amazing satisfaction in a piece you get to keep & admire?!?

       
  5. Terri Collins

    February 26, 2016 at 7:39 pm

    You are truly, a remarkable young Lady!! I am sure, a costume designer in LA would Love to have you on board!! Thanks for sharing. I look forward to your posts!

     
  6. Larissa Davis

    February 26, 2016 at 7:44 pm

    Beautiful work!

     
  7. Victoria @RufflesandGrace

    February 26, 2016 at 8:38 pm

    WOW! Gorgeous! You SHOULD be proud!!!

     
  8. Amy Barber

    February 26, 2016 at 9:48 pm

    What an amazing recreation! The details in the work truly make the piece phenomenal. I am always thankful for a little Top Gear when trying to wrap up a project. As lovely as a portrait!

     
  9. The Shameful Narcissist

    February 26, 2016 at 10:16 pm

    There is not a movie nor show that wouldn’t be lucky to have you as a costume designer nor would anything they’d pay you be remotely what you deserve. These pieces are beyond marvelous.

     
  10. sooze98148

    February 26, 2016 at 11:06 pm

    Angela, I don’t know how many people are on your email list or how many people read your blog BUT, like me, I’m sure most of us see your work and our jaws drop to our chests!

    I’m sure we don’t say it enough — your ideas and your skills are amazing.

     
  11. Emily

    February 27, 2016 at 12:34 am

    This is so incredible! I always read you emails and I’m sorry I don’t stop by to comment more often, but I could not NOT let you know how amazing this piece is!

     
  12. Sharyn McGinty

    February 27, 2016 at 12:56 am

    This is beautiful. You’ve an amazing gift.🙂

     
  13. foolishlife

    February 27, 2016 at 4:35 am

    Amazing!

     
  14. Ineke

    February 27, 2016 at 4:58 am

    It looks beautyful as all. Question: did you sew al the little beads by hand?

     
  15. swappinghowdies

    February 27, 2016 at 7:36 am

    Stunningly beautiful — wonderful job!🙂

     
  16. Ann

    February 27, 2016 at 8:57 am

    90hrs! Wow, that is dedication. Another stunning creation. I love that you add in how you made choices for lace placement, what you’d change, mistakes you felt you made, how much things cost. I find all of it interesting. I always look forward to new posts from you.

     
  17. Cindy

    February 27, 2016 at 10:49 am

    My word, I love reading your blog. You are amazing and such an inspiration to me. I always beat myself up when something doesn’t turn out perfectly, but you make adjustments or learn to live with it. Thanks for sharing your talent with all of us.

     
  18. GDR.

    February 27, 2016 at 1:08 pm

    Your skill level is awe-inspiring. This is a fantastic piece.
    I really do love your attention to detail.

     
  19. Nanik

    February 28, 2016 at 5:20 pm

    It is so beautiful!! Awesome!!

     
  20. Stefania

    February 29, 2016 at 7:20 am

    Beautiful!!!

     
  21. Swan

    March 1, 2016 at 3:30 pm

    I really appreciate the time and effort you take to show us your projects step by step. I can’t tell you how much I’ve learned from your posts.🙂 I love this riding coat.

     
  22. Sheila

    March 4, 2016 at 7:10 pm

    Gorgeous!!!! It is a true work of art!!! I admire your patience with all the hand work!

     
  23. Molly

    March 4, 2016 at 9:29 pm

    Absolutely breathtaking ensemble, Angela. Bravo!!!!

     
  24. jumeria

    March 9, 2016 at 5:06 am

    Oh I’m so in love with your costumes! You are such an Inspiration and I love to scroll through all your costumes❤

     
  25. finkelstein

    March 12, 2016 at 1:44 am

    This is amazing! I love the beading.

     

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: