Last Thursday I drove by the prettiest sunflower field, and was overwhelmed with the desire to make something inspired by it.
I also wanted to make something that could be photographed in the field.
Unfortunately, sunflower season is really short and I didn’t expect them to be around for another week.
Which meant I had to make a dress that week.
So I did!
I did the pattern drafting on Friday, and actual construction started on Saturday. I had the dress and a headpiece done and ready to be photographed by Sunday evening.
I think it turned out pretty well for two days of work!
The idea for this was very much shaped by the fabric I had in my stash. In fact, at first I didn’t think I had any fabric that would be suitable for a sunflowery historical gown. I was planning on making a few 1950’s pieces in autumn tones that would suit the backdrop, and that is what I spent a good chunk of Thursday/Friday working on. But the further along I got, the more I wanted to make something historical instead.
So I went through my stash and came across a recently purchased silk shantung. I would lovingly call this fabric baby poop colored…But I still bought it, because it has a very strong gold/green shift, which is striking when light hits it.
It isn’t exactly sunflower colored – but it has yellow, green and black tones in it which is reminiscent.
This was my original sketch, along with some skirt variations.
I designed this without researching references, but I did look to Costume in Detail* for construction notes regarding 1830’s dresses, which ended up being very helpful!
The parts I was most excited about (like the big sleeves and gold petal overlays) ended up in the finished dress. But other plans had to be dropped due to fabric and time limitations.
Remember, I only had two days, and six yards of fabric, which isn’t a lot for a historical gown!
The first idea I dropped, was the plan of having a pleated bertha collar. I decided it took too much fabric and time to create. Instead I draped and off the shoulder bodice which was shaped with gathering at the front and shoulder.
I made a mockup for this, then got everything transferred to paper. I also drafted the sleeves right away, which is rare for me. I tend to leave sleeves for last (as in, after the whole bodice is done) because I hate them so much. But there was no time to procrastinate!
The bodice pattern was cut out twice – once from a floral cotton which will serve as lining, and again from the silk. Boning channels were stitched into the seam allowance at the sides of the lining, and at the center seam.
I stitched the layers together, with the right sides facing each other, all the way across the neckline.
I ironed the lining inward and stitched around the neckline by hand. At this point the side seams were still left open. And I wanted to leave them open until after sewing the sleeves on. Which meant I had to make sleeves.
I cut the sleeves out from a layer of black cotton sateen, and a layer of floral embroidered glitter mesh.
I’m SO glad I remembered that I had this fabric in my stash. I don’t own a lot of black material and was quite frantic trying to find something for the sleeves that had a lot of texture, but wasn’t too thick or heavy (my previous candidate was velvet, which is both thick and heavy).
This ended up being perfect, and I had just enough left to work as an overlay.
The sleeves were gathered down by hand. Originally I wanted these to be pleated, but I thought having pleated sleeves with a gathered bodice would look strange. So I gathered them instead.
I was going to pad these to get the amount of volume I wanted, but I decided to try stitching ribbon in first to see if that would help. I’m not sure what this is called (sleeve stays, maybe?) but it is often shown in sewing books.
The ribbon forces the sleeves to stay a certain length, which prevents them from sliding down the arm and losing their poof. These sleeves were about 13″ long in the center. And the longest piece of ribbon is 7″.
I didn’t have high hopes that this would work based on my test fitting…but it totally did! No need for sleeve pads here!
But the sleeves weren’t done! I wanted the gold fabric to lay overtop of the puffed portion, almost like flower petals.
These petals were created with half circles of fabric, in various sizes.
Each half circle was folded in half, and stitched together to form a quarter circle shape. The quarters were turned right side out and ironed. Then the rounded edge was gathered down by hand until it was an inch or two long.
Five of these will be used on each sleeve, which the longest petal at the center of the shoulder.
This was stitched onto the top edge of the sleeve. I also finished the lower edge of the sleeves with matching gold piping.
The lower edge looks a bit messy from the interior, and the top edge is kind of…uh…girthy? It’s almost a cm thick at points! So I decided not to finish this edge, since any stitching or binding would just add to that.
Even though it was quite thick, my sewing machine stitched through it like a champ.
Once the sleeves were on, I sewed up the side seams. I also added boning to the front seam (it stops just below the gathering) and the side seams. Leaving me with this!
It looked so much better than I had expected it would – which really got me feeling excited about the project!
Though the sleeves were the hard part of this project, they were made easier by the fact I had a clear vision. Where my thoughts towards the skirt were murky at best.
I knew I wanted some visual interest on the skirt – I recently made two 1840’s dresses with plain rectangle skirts, and I’m a bit bored with them. Not the shape, just the lack of trimming.
And the 30’s were famous from elaborately trimmed skirts, so I felt this project would be incomplete without something.
My first idea was pintucking the skirt, then decorating it with sunflowers. But the skirt would have been too short if I did that (I was working with the fabrics horizontal width for the skirt, about 45″).
Then I decided to trim the hem with large triangles, made from black velvet and piped with matching shantung. These could be stitched to the underside of the hem and turn outward, like petals. They could also serve as frames for hand made sunflowers. This idea is seen in my original sketch.
I was pretty committed to this idea, so much so that I wasted 1/2 yard of my precious silk to create the piping. I also cut out a dozen velvet triangles, and poly shantung for lining.
The piping was stitched to the lining, with the wrong sides facing outward. Then velvet was pinned on top with the edges tucked inward, covering the frayed edges of the shantung.
These looked OK, but I didn’t love it. The velvet lacked texture since it was so dark, and the piping blended into the skirt. I thought it was too harsh and clashed with the bodice.
So I decided to dress the skirt up with lace instead. I had 12 yards of 7″ wide chantilly lace that I bought on etsy a while back. I figured I could sacrifice a few yards for this, and still have enough leftover for a civil war era gown (which I’m pretty sure was my original intention for it).
Despite my intentions for something different, the skirt for this was just a rectangle. But I had a reason for it! On top of fabric limitations, this fabric has a very different sheen and coloring depending on the grain line. Cutting the skirt as a rectangle means the grain is the same all the way across, and ensures the sheen will look even.
The rectangle for this was 3.5 yards wide, and the full width of the fabric.
I marked a line two inches away from the selvedge, and ironed the lower edge up so it touched that line.
Then I hemmed it with a super sloppy, very wide catch stitch.
The chantilly lace was placed 6.5″ away from the finished hem, and stitched on by hand with running stitches.
The top edge was gathered down by hand to match the waist of the bodice, then stitched on by machine.
After that, I turned the back edges inward. I had about 1.5″ of allowance on either edge, but I wanted them to overlap so I wouldn’t have to add a modesty panel. I also wanted to stitch boning into both edges without any visible topstitching.
I honestly don’t even remember how I went about doing this, but I know the end result was far from symmetrical and not too pretty in terms of construction. But it looked okay from the outside…which is all I can really ask for when making a dress in two days!
I stitched hooks and bars into the back to serve as closures.
I also added a belt. I debated about this a lot, but strongly felt the dress needed something to break up the bodice and skirt. I pinned a velvet waistband on first, but wanted something with more texture. So I ended up making a waistband from black cotton sateen, then fussy cutting bits of beaded lace out and stitching them on.
This looks a bit messy up close since the lace has a large wandering floral pattern, and really isn’t made to be cut into tiny pieces. But from a distance it still has visible texture and adds a bit of sparkly!
Now with my limited fabric and time remaining, I decided to make sunflowers. These were created from dozens of 4″ wide circles. Each one was cut out, then ironed into quarters. Like with the sleeves, the curved edge is gathered down.
Except this time they were sewn on to a circular base of interfacing.
The bases were covered with velvet, and more butchered black lace. I wanted the centers to have a lot of texture to mimic sunflowers, but I didn’t have time (or enough black beads) to embellish the centers fully.
The lace was a way to quickly get the effect I wanted, and it worked perfectly!
The lace had to be stitched on by hand, and while I was at it I stitched on some larger black beads, and some gold sequins. The sequins were a random addition because I love sequins. But I’m so glad I decided to use them, the contrast of the gold against the black makes them look lit up, regardless of the lighting.
I pinned the sunflowers onto the dress while it was on my form, before sewing up the back seam. This way I could remove the dress from the form and stitch the flowers on while the skirt was completely flat.
Even though that made the sewing process easier, I didn’t do the best job of this. They were *really* roughly stitched on with whip stitches at the underside of the fabric. I tried to stitch through the edge of the interfacing centers, since that is the heaviest part of the flowers.
I wish the stitching was cleaner, but I’m actually pleased with the placement of the stitches. Since I didn’t tack down the petals, they flip outward slightly, making them look more natural.
That was the dress done! But I knew I wanted to make a headpiece too.
This ended up consisting of two gathered strips of the black mesh, and a bunch of the small flower “petals”. These were stitched into a a single strip.
That I hot glued onto a headband and backed with boning and felt. Am I proud of the quantity of hot glue on this? No. But it looked good in photos and took less than 10 minutes to make.
The “finishing touches” included pinning my petticoats so they hung above my ankle. And pinning fabric sunflowers onto my funtasma shoes* so it was less obvious that I don’t have any 1830’s appropriate footwear.
1830’s footwear is supposedly the easiest to fake, since they wore square toed flats. But I do not own a single pair of flats because they make my feet look massive.
And that was it! Also for those curious, this was worn over my recently completed 1840’s corset based on a pattern from Norah Waugh’s Corsets and Crinolines*. I have a couple photos of this on instagram (here, here, and here) and I can vouch for this pattern being awesome – I love the shape of it, and it is pretty comfy!
For petticoats, I wore a cotton/net full length petti that I made a few years ago. It is full length, so I had to pin it up by about 6″ for this photoshoot. And that was stacked on top of two knee length tulle petticoats (specifically, this one).
I’ve been really unhappy with the volume in my other 40s/30s skirts and I thought this would be a good solution. And I was right, look at that poof!
I’ll post the full photoset tomorrow.
And as always, thanks for reading! I hope you enjoyed!
16 thoughts on “The Sunflower Gown : Making a 1830’s Dress”
Again a great job. Love it.
Parabéns, suas peças de fogurinos são lindas.
Muitas felicidafes e sucesso.
Em Sex, 21 de set de 2018 12:04, Angela Clayton’s Costumery & Creations escreveu:
> AngelaCostumery posted: “Last Thursday I drove by the prettiest sunflower > field, and was overwhelmed with the desire to make something inspired by > it. I also wanted to make something that could be photographed in the > field. Unfortunately, sunflower season is really short and I ” >
This is so pretty!!!! You are simply amazing!!!!
Angela, that is amazing! I am totally in love with your sunflowers–so perfect for the gown. And in 2 days? Whew! Good on you, mate!
You are SO talented!
the dress is gorgeous and you are stunning in it!
Sent from my iPhone
Only two days? All this work? It was so much to do! You are incredible! And the gown is amazing! I love it!
My goodness! I wish I could put together something like this in just a few days! This is a fantastic piece. You are truly talented.
Oh my gosh! Incredible gorgeousness in only 2 days. Fantastic!
Absolutely GORGEOUS U really are so talented !
WOW!!! The dress ist absolutly amazing. Very good work, Angela. Thank you also for sharing your work in progress. That´s what is the most interessting part for me and always a great inspiration. ❤
Such an effective dress. Can’t believe how quickly you made it and those sleeves are delightful.
Vraiment un très beau travail !
You have so many creative ideas! I love seeing what you have made. Keep up the great work.
Yet again, absolutely beautifully made. I love that colour on you as well.