RSS

Category Archives: Medieval

Making a Horned Headdress from Pink Brocade

Making a Horned Headdress from Pink Brocade

Last week I found myself in a bit of a rut. I had finished a few projects and wasn’t feeling very inspired or motivated to move forward with any new plans. My progress was so slow that it was barely worth making the effort.

Usually when this happens it means it’s time for me to make something fun that is different from my recent projects and won’t take very long to complete. I didn’t have anything specific in mind, but during a trip to Jo-anns I came across a pack of framed stones that gave me an idea.

Isn’t it funny how you can have a room full of fabrics and beads and no idea what to make, but a four dollar pack of embellishments can give you a dozen ideas? I bought some seed beads to go with the stones, but I already owned the rest of the materials for this project.

Those materials include various gold brocades, a pink floral brocade, scroll print chiffon, fake pearls, and a few different types of glitter mesh.

Horned headpiece progress-7949

I planned on using these materials to make some sort of elaborate horned headpiece, with one of the stones sitting at the center front. None of the materials for this project are historically accurate, but I wanted to make the silhouette very close to the traditional heart shaped headpieces from the 15h century.

Like most of my headpieces (ecspecially the medieval ones – remember my escoffin?) this design was inspired by, and based on an image from Women’s Hats, Headdresses and Hairstyles: Medieval to Modern*.

Here is my sketch, and some fabric swatches.

Horned headpiece progress-8245

Drafting this was…interesting. I started by making the cone since I thought that part would be easy. I was wrong. The cone isn’t a partial circle. To cup the head properly and cover the ears it has to have a totally different shape. And trying to fit the base those cones attach to was a challenge as well.

Eventually I ended up with something that looks like this. The original plan was for the horns to be sewn together at the center, which would give them an upright look. When I attempted to do that after assembling the horns I realized that would cause my ears to show, so instead they were sewn a quarter inch apart. That’s why my finished headpiece has a flatter top than what’s shown here.

Horned headpiece progress-7963

Horned headpiece progress-7964

I transferred my pattern onto thicker paper, then traced the new pattern onto heavyweight interfacing and cut the pieces out.

Horned headpiece progress-7966

Three of the pieces were sewn together to create the domed back of the headpiece. Then wire was sewn into the edges of all the pieces.

Horned headpiece progress-7968

The wire caused the base of the horns to sit nicely, but the tops were collapsing inward. So I sewed two more bands of wire into each horn to make them stiffer.

Horned headpiece progress-7971

The horns were a bit bumpy at points, since the interfacing can have a weird texture to it when it’s forming curves. I covered them with quilt batting to fix this, then pinned them into cones and held them up to make sure the shape was right.

Horned headpiece progress-7974

They looked pretty good, so I went ahead and draped the striped patten that goes overtop.

Horned headpiece progress-7975

The pattern was cut apart, then transferred onto paper where I added quarter inch seam allowances to each piece.

Horned headpiece progress-7981

Then I cut all the pieces out! This took longer than I had planned since I ended up adding overlays to most of the tiers. To do this I roughly cut out the pattern from mesh, then sewed it onto the base fabric and trimmed the edges.

Trimming the edges afterward means you don’t have to worry about the mesh warping as you sew it and becoming too small to cover the base layer.

Horned headpiece progress-7984

Here are a bunch of trimmed pieces, ready to be sewn together.

Horned headpiece progress-7985

I started with the top tiers.

Horned headpiece progress-7987

Then did the rest! I wasn’t thrilled with the end result – the seams are a bit bumpy and I felt like the contrast between the fabrics was poor. But I wasn’t too upset since I knew beading would help differentiate the tiers and add a lot of texture to the piece.

Horned headpiece progress-7988

Horned headpiece progress-7989

I stretched the fabric over the cones, then folded the raw edges under the interfacing. After sewing the edges down I did up the back seam with upholstery thread, which turned them into actual cone like horn things!

Horned headpiece progress-7991

And the beading begins! I decorated the second tier with iridescent sequins that follow the pattern of gold mesh. Then used two rows of pearls and seed beads to cover up the seam line.

Horned headpiece progress-8001

The forth tier has rows of gold seed beads spaced one inch apart. Once again each seam is covered by a line (or two!) or fake pearls that are framed by seed beads.

Horned headpiece progress-8089

The bottom tier has a quilted design created from pink seed beads, and the bottom edge is trimmed with piping.

Horned headpiece progress-8090

Here are the two horns finished!

Horned headpiece progress-8091

I covered the interfacing that makes up the back of the headpiece with quilt batting and gold brocade. Then I sewed the horns onto it. After doing this I could try it on and get an idea of how it looked. It was at this point that I realized the panel i’d cut out for the front was way too small.

I recut it from more interfacing, this time adding a half inch to the sides and a full inch to the back edges. Once again I sewed wire into the edges, then it was covered with pink chiffon and trimmed with piping. I sewed it onto the rest of the headpiece, and now I had something wearable!

Horned headpiece progress-8096

To finish it off I cut out the veil  (a partial circle)  from the scroll print pink chiffon. Then I turned the edges inward by hand so they wouldn’t fray.

Horned headpiece progress-8098

I sewed the veil onto the front of the headpiece, then covered its join point with one of the stones that originally inspired this project. The final touch was a line of pearls across the front, and that was it!

Horned headpiece progress-8240

The headpiece is currently unlined, since I’m not sure if I should partially stuff the horns before lining them or not. I’m also not sure if I should sew combs in to help keep it in place. I’d like to figure those things out before finishing the interior.

After trying this on I noticed the horns didn’t cup my my head as nicely as I wanted. This was fixed by gathering the center back slightly and bending the wire.

As you can see the back isn’t too pretty (or symmetrical – oops!), but the veil covers most of it!

Horned headpiece progress-8243

And here is a close up of the horns, look at all those different fabrics!

Horned headpiece progress-8242

I took some worn photos of this headpiece yesterday, but the lighting wasn’t the best and the only photos I like show it from a single angle, which sort of stinks.

I’m sure i’ll get more pictures of it in the future once I make a costume that matches it! In the mean time I’m wearing it with a brocade kirtle I made last year.

Horned headpiece 2

Horned headpiece 1

After wearing it for a bit I’m pretty sure I need to add a ruffle to the back to cover my hairline…or maybe wrap my head with fabric before putting it on, so that isn’t visible. But since it’s quite tight that might be difficult. I’ll have to play around with it a bit.

Other than that, I really like this! I think the beading turned out nicely and I love all these fabrics together. It took me about a week to make, but I could have made it in half that time if it was my only focus.

It was a lot of fun, but unfortunately now that it’s done i’m back to feeling uninspired! I may have to make another one of these…

Thanks for reading!

 

 

Tags: , , , , , ,

Making a Mantle & Long Tailed Hood

It’s taken me a while to get this post out but I think i’m finally ready to get back into the swing of things with twice a week updates. And i’m starting by blogging about the cloak/capelet/mantle which is the final piece in my Cotehardie ensemble. You can read about making the cotehardie here, and I also have a post about making the matching shoes and leggings, which can be read here.

This mantle also has a liripipe, which is a long tailed hood. They look a bit ridiculous, but I kind of love them. It was my first time making anything like this, and also my first time attempting dagged edges. So lots of new experiences were involved in making this project!

The first step was creating a pattern. This would have been really easy to flat draft, but I chose to drape it on my dress form and trimmed the fabric until I liked the length and shape. I copied the pattern onto paper and added seam allowances.

Then I created the dagged edge pattern. First I drew out an arrow shape, then I cut it out of bristol board (a very thick paper) which gave me a template. I placed the template on the hemline of the cloak and traced around it ten times, until the arrow pattern was repeated all the way across. The finished pattern looked like this!

DSC_9484

I traced my pattern onto the lining fabric I purchased for this project – which is a stiff quilters cotton.  I chose this fabric since wanted a sturdy material that wouldn’t slide around or fray much, since the seam allowance will be trimmed quite small at points. The only one I could find in the color I wanted has a glittery spray on it and a star print to it…which probably isn’t historically accurate, but it’s super pretty!

In case it wasn’t obvious, I designed this pattern so I could cut it on the fabrics fold so I don’t have to have a seam at the front.

DSC_9504

I roughly (as in, with more than an inch of excess at each edge) cut out the cotton lining and my top layer of fabric (which is a heavy wool coating).

Then I pinned them together. I used a lot of pins across the dagged edge to make sure neither of the fabrics would move when I sewed them.

DSC_9506

In hindsight, I probably should have used safety pins instead of straight pins, since I pricked myself a lot. 

DSC_9508

Now this part should have been pretty straight forward. All I had to do was sew around the lines I had drawn on the fabric. Shouldn’t be that hard.

Apparently my sewing machine thought differently. It decided it wasn’t going to sew curved lines. I changed the needle, adjusted the tension, tried different threads. All sorts of things, but it still refused to stitch any part of the dagged edge properly.

So each arch is made up of lots of choppy straight lines, instead of being beautiful curved ones. I think the thickness of the fabric goofed my machine up which is why it gave me so much trouble. Luckily the heavy weight of this material hides the wonky stitches, and by some miracle all the curves were pretty smooth when I turned everything the right way out.

Once I finally finished sewing the hem I trimmed the edges down between one quarter and one eighth of an inch. Then I snipped the tips of each arrow and the arches between each one, so they would turn over nicely.

DSC_9511

I used a pen and tweezers to help turn everything the right way out.

DSC_9512

Then added more pins to keep everything in place while I moved onto the next step.

DSC_9515

That step involved tacking the wool to the lining, then stitching around  each edge with embroidery floss. I like how the floss looks around the edge, but i’m disappointed that the tacking created such visible divots in the wool.

The stitches aren’t actually visible from the front side of the fabric yet they are still very obvious. There isn’t much I can do about it now, but i’ll keep this in mind for the next time I work with coating fabrics.

DSC_9579

With that done the cloak portion was mostly finished. So I moved on to drafting the collar piece and hood. To help me visualize the hood a bit better I used this pattern as a guide – and by that I mean I drew out something that looked kind of similar based off of measurements I took.

DSC_9485

Then I cut out the collar from blue wool.

DSC_9520

I did up the back seam and sewed a half inch away from each edge to create guidelines for where the edge gets turned under. I turned the edges over by hand and secured them with a running stitch.

DSC_9523

Unfortunately i’m missing a few photos here, but the process should make sense without them. The next step was sewing up the shoulder seam/darts on the cloak, which I did by machine. I also sewed up the back edge, but that was done by hand.

Then I sewed the bottom edge of the collar onto the cloak with a slip stitch. I made sure the opening of the collar lined up with the center front of the cloak, and the seam lined up with the back seam of the cloak.

DSC_9577

And I sewed bias tape over the raw edge where I trimmed the excess fabric from the shoulder darts.

(“shoulder darts” sounds a lot more exciting and dangerous than they actually are)

DSC_9584

Now time for the hood/liripipe!

I didn’t make a mock up so I decided to start by cutting out the lining layer. This way I could get an idea of the shape before potentially ruining the remaining wool fabric. Once I placed my pattern on the fabric and drew out the seam allowances I realized the tail was kind of tiny. Not nearly as dramatic as I like things. So I made it bigger.

DSC_9518

Here are the lining pieces cut out and pinned. I sewed the edges together with half inch seam allowances and did a little test fitting. I was pretty happy with the end result so I moved forward with the wool layer.

DSC_9522

Since my paper pattern was now inaccurate I used the lining as a pattern for the wool layer. Before sewing the edges I marked the turn over point at the front of the hood. The raw edge will be turned inward by more than an inch to create a facing of sorts.

DSC_9521

Here the hood is, turned the right way out with the front edge turned inward.

DSC_9525

I tucked the lining into the top layer of the hood, then whipstitched it in place an inch away from the front edge of the hood. This way the lining isn’t too visible when the hood is worn.

DSC_9526

Then the hood got sewn onto the collar.

DSC_9736

And lining was sewn into the interior of the collar so none of those ugly raw edges are visible from the inside.

DSC_9740

The front closes with three small buttons and loops. The buttons are the same ones used on the Cotehardie, and the loops are made from some cheap twine I bought from Michaels.

DSC_9738

As cool as this hood looks, it’s not very practical. It really didn’t want to stay on my head, since it isn’t very deep. I didn’t want to be constantly fiddling with it so I added a plastic comb on the interior of the lining. This isn’t noticeably when it’s worn (whether the hood is up or down) and makes it way easier to wear.

DSC_9739

And that’s it!

DSC_9742

Here is the finished piece worn with the rest of the ensemble!


DSC_0515resize

DSC_0535resize

And one without the mantle, but with the crown I made!

DSC_0512resize

Now I guess I should get to work on the matching ladies ensemble!

Thanks for reading!

 
 

Tags: , , , , , , , ,

Making a pair of Long Toed Shoes / 14th Century Inspired

This post is about making a pair of shoes. Yup. That is a thing that I decided to do. I don’t know if I can really call them shoes, since they have the flexibility and appearance of slippers, but they were supposed to be shoes. And I don’t think they look too bad considering this is my first attempt at making a pair!

I needed shoes to wear with my Cotehardie ensemble (post about making the cotehardie is here). I looked around online and couldn’t find ones in my price range. Even the really inaccurate, modern boots from DSW were double what I wanted to spend. So I decided to make a pair from wool I had leftover from making the mantle (post about that should be up soon).

Before getting into this I feel I should mention that I had no idea what I was going. And that I know nothing about making shoes. I didn’t spend a lot of (read: any) time researching what the process should be. I made it up as I went along.

But I did find a really amazing resource for medieval footwear! This is the site. I didn’t read through their construction guide, or use any of their patterns, but found the images very helpful. It was a fantastic starting point for figuring out what my boots should look like. I ended up combing the Side Lacing Boot and the Peaked Shoe.

Now onto materials!

For the soles of the shoes I used some embossed pleather from my stash and the cheapest shoe inserts I could find at target. The blue fabric is leftover heavy wool coating. I ended up using some spandex, wool suiting, and embroidery floss as well but those things aren’t pictured.

DSC_9533

For the pattern drafting process I used newsprint, cardboard, tape, and a plastic bag.

DSC_9534

To figure out the shape of the sole I traced the outline of my foot onto the cardboard. Then I made the end super pointy. According to this article, in the 1300s the point was usually only extended by 10% of the foots length. But I have big feet. And I always stay away from pointed toe shoes since they make my already large feet look like clown feet.

And I didn’t want that to happen here. So I decided to make the point really long with hopes that it would look very exaggerated, instead of making my feet look huge. I think it worked. Kind of.

DSC_9536

I cut out the sole pattern and traced it onto the fake leather.

DSC_9538

And onto my cushion soles that I bought from target. Unfortunately these weren’t big enough to accommodate the pointy toe.

DSC_9539

To combat that I fused felt weight interfacing onto the tip of the fake pleather, so the point would keep it’s shape.

DSC_9546

All that was set aside for a bit while I focused on making the shoe pattern. The first step in doing this was taping the cardboard sole pattern onto the bottom of my foot. Then I taped crumpled plastic bags overtop of it so the exaggerated toe had to some shape to it instead of being completely flat.

Then another plastic bag went over my entire foot and I wrapped painters tape around everything until I had the shape I wanted.

DSC_9540

I marked a seam line around the ankle, the centerline, where the sole ended, and the side line where I wanted the lacing to be. I also drew the shape I wanted the top of the shoe have. Then I cut the bag off my leg, fixed up the wonky guidelines, and cut it into two pieces.

DSC_9543

I traced that onto paper and bam, a pattern! The only major change was that I added seam allowances.

DSC_9545

I cut the shoes out from wool and sewed the pieces together.

DSC_9549

Then sewed around each edge to create guidelines where the fabric should be turned under.

DSC_9550

All the edges were turned under at the stitch line and sewn in place with a running stitch. I did this by hand so the stitching wouldn’t be too obvious.

DSC_9580

Switching back to the soles, I placed the pleather layer beneath the cushion sole. Then covered them with a wool suiting, so the bottoms looked pretty.

DSC_9547

I also cut out a layer of gold spandex, which will be used as a top layer for the soles. I figured this would wipe down well in case the shoes get sweaty inside.

DSC_9548

I used basting stitches to sew the spandex on after the soles were covered with suiting.

DSC_9700

Then I sewed eyelets into the sides of both shoes. I did this by hand with three strands of embroidery floss. The bottom inch of the side edge (that doesn’t have eyelets) was sewn shut by hand.

DSC_9701

Then I pinned the top part of the shoes onto the soles and sewed them on by hand. And that was it! They are done!

DSC_9734

DSC_9735

Stuff I learned: The sole should be slightly more narrow than your foot. Mine ended up being a lot wider than they needed to be. But I would rather that be the case than them being too small! And using anything other than leather will probably result in the shoes looking like slippers. Oops.

Also – i’m fully aware these aren’t very practical. They definitely aren’t waterproof and have no traction. There also isn’t topstitching around where the top of the shoes meets the sole, so I doubt they will be very durable. I’m going to wear these for a few sets of photos, not to an event that requires a lot of walking so it isn’t a big issue for me.

But you could definitely use a similar process, with rubber soles and leather that would be more appropriate for heavy wear.

Here they are worn with the cotehardie and tights!

DSC_0512resize

And the matching mantle.

DSC_0515resize

A write up on making the mantle and a tutorial on the crown will be coming up soon. As for the leggings, I’ll include that info here because they were really easy to make. I used a pair of forever 21 leggings as a guide, then added several inches to the waist and ankles since my fabric was one way stretch (and the leggings I based them on were made from two way stretch knit).

DSC_9383

Sewed up the crotch seams and side seams…

DSC_9385

Folded the hem inward by a half inch, twice, and hand sewed it down.

DSC_9486

Then turned the top edge inward by a half inch, then by two inches, and sewed across the bottom to create a channel for elastic. I sewed the elastic in and that was it! This fabric looks very flesh toned in the photos above but it has a pretty gold sheen to it which should come to life when I photograph this outdoors.

DSC_9487

And that’s it for this blog post! Thanks for reading and I hope your New Year is off to a good start!

.

 

Tags: , , , , , ,

Making a Menswear Inspired Cotehardie

It’s time for a new project! It’s been a while since i’ve been able to say that. I’m finally beginning work on a medieval ensemble that I bought fabric for a few months back (more info on that here).

This project is menswear inspired and consists of a few different pieces, the first is a cotehardie, which is a slim fit long sleeved garment. It will be worn over tights and a pair of shoes which I plan on making myself. Overtop of that there will be a mantle (capelet) which will have a liripipe (long pointed hood). And I might be making a crown to go with it as well. So lots of different pieces to keep me busy!

I decided to start with the most important piece which is the cotehardie. There are tons of reference of these in artwork from the middle ages, but that artwork isn’t very fun to look at. So here is an example from “The Complete Costume History” book. These are some pretty fancy examples, mine is a little less elaborate!

DSC_8424

Here are my main fabrics for the ensemble. The cotehardie will be made from a wool suiting, the mantle and shoes will made from a really heavy wool coating, and the tights from a gold knit.

DSC_7794

Once I had my references gathered I started draping the pattern. This part was a little tricky. Cotehardies shown in artwork seem to be really fitted but do not have any seams in the front or back. I managed to accomplish this but the end result hinders mobility a bit which is kind of a bummer.

When I was draping I added darts to get the fabric to fit the form tightly, but I removed these when transferring the pattern onto paper.

DSC_8426

Once that was transferred to paper and seam allowances were added I had a pattern. Then I made a mock up.

Here is my mock up being tried on, the left is before pinning, the right is after pinning. I managed to get an okay fit by raising the waistline and shoulder, but even after doing that there is some gaping around the arm opening. That part doesn’t look great, but It’s kind of unavoidable when trying to make something super tight and without seams when you have boobs.

DSC_8428

Once my alterations were made to the pattern I cut the pieces out.

DSC_8430

At this point I realized the wool suiting I bought was really flimsy. I felt like it would show every lump and bump and not look as hardy as a cotehardie should be (haha). I know with suit jackets interlinings are often used to bulk the material up…but I didn’t have any of those around. So I cut out a layer of flannel and used a random pad stitching(ish) technique to attach it to the wool.

DSC_8431

I didn’t bother to add it in the hips, I felt like the fabric stiffness was more important at the front and waist.

DSC_8432

When that was done I folded the front edge inward and sewed it down.

DSC_8433

DSC_8434

Now I had two pieces that looked like this!

DSC_8435

This will have a false button closure on it. During this period buttons were used as decorations more often than not. If they were functional they closed with a button loop system, not button holes. I’ve used buttons/loops before and it can become quite finicky, so I decided to make the buttons decorative and have the cotehardie snap closed.

I used bright pink basting stitches to mark the centerline on the lapels, which show where the buttons and snaps will be placed. Then I used chalk to pinpoint where each one would go.

DSC_8436

A MILLION YEARS LATER (or nine hours, one or the other) I had all the snaps and buttons attached. I’m really out of practice with sewing these on because it took me so long. It also ripped my fingers up a bit, since I sewed them all on in two days.

DSC_8593

DSC_8595

Here is what it snapped closed! They don’t all line up perfectly a couple might be a few millimeters off. But it doesn’t effect the look or wear of the garment at all so I don’t mind too much.

DSC_8596

Now at this point I realized my cotehardie was pretty boring. And I don’t like making boring things. Even though I liked how the buttons looked, it just wasn’t enough detailing to make it really pop. But I didn’t have any gold trims that would match, so I wasn’t sure what to do.

Then it hit me: I should add lions.

Because when in doubt, add lions, right?

Heraldic cotehardies were actually a thing (as seen here) where a coat of arms/crest/emblem would make up the pattern on a dress or tunic. So using that theme I started googling medieval emblems until I found one I liked. Eventually I came across the “Coat of arms of Castile and León” which had a handy vector image of a lion on it’s wikipedia page.

I ran that through photoshop, then printed out two lions.

DSC_8599

When I held these up I realized it would look like two lions framing my crotch. Which wasn’t a great look. So I decided to only use one lion and figured out a different pattern for the other side later on.

I traced the outline of the lion onto double sided fusible interfacing. Then I fused it onto gold spandex, since spandex doesn’t fray I managed to avoid the frustration of turning over each edge, which was awesome.

Finally, I cut the lion out. Which took ages, there are so many fiddly bits!

DSC_8600

Then I ironed the lion onto my cotehardie, and tah-dah! Instantly fancier!

DSC_8601

For the other side I decided to add fleur de lis, which I traced from this coat of arms.

DSC_8604

I cut them out so they looked like this.

DSC_8605

Then fused them on.

DSC_8607

Before doing anything else I stitched up the side seams and turned the hem inward by an inch.

DSC_8609

Then I stitched around the edge of my appliques and added some details with more stitching. I did this with regular cotton thread since I didn’t have any embroidery floss, which isn’t ideal, but I still think it looks pretty good!

Next time I have E6000 out i’m going to add rhinestones to the lions crown and eye. I think that will look neat.

DSC_8611

DSC_8613

DSC_8612

And here it is laid out flat~

DSC_8614

After a quick fitting I realized the shoulder fit was pretty bad. So I took it in a bit and added some quilt batting to stand in for shoulder pads. Even that didn’t help very much, since the main issue is that the shoulder was cut too narrow. It is too late to fix that on this piece, but I made a note on the pattern. If I ever use it again i’ll add at least a half inch to that area.

Then I turned the collar and arm holes under so they had pretty finished edges.

DSC_8635

Which meant it was time for sleeves! Here is the pattern I drafted for them. It was hard to get them really tight, but also wide enough to have a nice silhouette.

DSC_8641

They were cut out of the suiting and sewn up the side.

DSC_8640

And the process was repeated with some polyester lining fabric.

DSC_8639

Then the lining was sewn to the wool sleeves.

DSC_8642

The lower edges of the wool got turned under by a half inch, then the lining was sewn to cover the raw edge.

DSC_8643

And I sewed on more buttons! Because you can never have too many of those.

DSC_8644

I whip stitched the sleeves on.

DSC_8720

Then cut out lining for the body of the garment and sewed that in. This was probably the hardest part since i’ve never lined something with such a curvy shape before. I also took my cotehardie in quite a bit, but didn’t mark those changes on my pattern. So there was some guesswork involved when I used it to cut out the lining.

But I managed!

DSC_8721

And now it’s finished (aside from a couple rhinestones)! I love everything except the shoulder fit. The slope on those is a bit to dramatic and they are too narrow. But I think the rest of it is pretty awesome. Especially the lion. That is probably my favorite part.

DSC_8723

DSC_8725

One piece down, a couple left to go! Worn photos of it will be taken soon, but I want to get the tights and shoes finished first.

Thanks for reading!

 
 

Tags: , , , , , , ,

Making a Maroon Medieval Dress

Last October I started on a 15th century inspired project which I titled the “Maroon Medieval Ensemble”. Unfortunately it didn’t go as planned and the only finished part of the project is a rose colored chiffon chemise (which I blogged about here). The dress ended up in a bin at the top of my closet, which is where projects go to die. Or at least it’s where they go when i’m not ready to throw them out but don’t plan on finishing them.

The reason i’m now blogging about this project is because it’s survived the bin of death! Or at least part of it has.

When I was working on my Medieval Escoffin I realized the colors and materials I was using were quite similar to the fabrics in my Maroon Medieval dress. I even used some of the leftover piping from that project on the escoffin. Though the dress wasn’t wearable at all I got it out from the bin of death, I figured I could salvage some part of it and use it as the base for a dress that could be worn with my escoffin.

Which I did! And that’s what i’m blogging about.

Here is the dress in it’s unaltered half finished state:

DSC_8021

I don’t think it looks bad from the front. The real issue is that it didn’t fit properly. The waist was too long and didn’t flare enough to sit smoothly over my hips. This caused the bodice to constantly ride up and fold around the waist/stomach area which looked pretty awful.

I majorly goofed up on the back. I added boning panels to a bias cut seam and didn’t realize until later on how warped and pointed the back had become, especially around the neckline. The eyelets were also placed too far apart into fabric that wasn’t reinforced properly. And I tried to sew them with rayon thread which is a big no-no, they were an absolute mess!

I decided that the top part was unsalvageable. But the bottom half was perfectly fine – okay, it’s a little shorter than I’d like, but other than that it’s fine. So I decided to keep that part and attach it to a new bodice which would hopefully fit better and nicely compliment the escoffin.

DSC_8022

Before talking about the new bodice, here are some pictures of making the bottom half of the dress. My pattern for the front side looked like this.

I flat drafted it and didn’t make any mock ups, which I think is the reason behind my fit problems.

DSC_0285

The bottom band was also flat drafted. This part of the dress is made from the cheapest jacquard fabric that Joanns has in their home decor collection.

DSC_9802

The bottom band is trimmed with piping. I used a really pretty floral brocade for this. I cut strips out on the fabrics bias and sewed them together.

DSC_9808

Then I folded them in half so they covered a piece of cotton cord and sewed with the presser foot as close to the cord as I could get.

I made this before I realized that lightweight fabrics need another layer of material between them and the cord. Otherwise the markings on the cord are visible through the fabric and the piping can looked puckered  – which totally happened here.

DSC_9809

I think I made fifteen yards of puckery piping.

DSC_9811

The bottom band was sewn together with french seams.

DSC_9812

The raw edges were turned inward by a half inch and hand stitched down.  Then the piping was sewn on by hand. To prevent the edges from fraying I sewed some thin horsehair across the top and bottom edge, but I don’t have a picture of that

DSC_9814

Here is the finished band, which was then sewn onto the dress. I think those are all the relevant progress photos I have of this part. The dress itself is made from a cheap suiting I got for less than $3/yard from fabric.com. It’s a three piece pattern and sewn together with french seams (at the sides and at the back). The collar took the most time but that part got cut off so I won’t ramble on about making it!

DSC_0350

My new and improved bodice is made from more of the red jacquard. I used the bodice pattern from my Damask Print Dress since it doesn’t have any front seams (dresses in this time rarely did) and fit me surprisingly well. I just altered it to be a three piece pattern with an opening in the back instead of at the sides.

I would have cut this as one single piece but I didn’t have enough fabric left to do that.

DSC_8024

I made facings to go around the arm holes and neckline of the bodice.

DSC_8025

It all got turned inward and tacked down by hand so stitches weren’t visible.

DSC_8026

Then I made some trim from remnants of the brocade piping, some damask print bias tape that is covered in gold mesh, and little chiffon ruffles. All these fabrics were used for my escoffin and I thought this would be a good way to bring those textures and colors into the dress.

DSC_8144

Then I sewed a whole bunch of eyelets into the back. They are sewn between two pieces of plastic boning so they won’t stretch or tear.

DSC_8617

Then the side seams got done up. I did this the normal way, then folded the seam allowance inward and stitched across the folded edge to create a boning channel. I added two pieces of plastic boning to each side of the bodice. This is to prevent the bodice from bunching up at the sides, which can easily happen in bodices that don’t have darts or bust allowances in them.

DSC_8618

When that was finished I hemmed it and got to try it on for the first time. The fit is pretty much perfect, it’s the right length and doesn’t compress the bust too much or flare out awkwardly around the arms, which is great. I’m really pleased with this pattern!

DSC_8632

DSC_8631

Now it was time to work on the sleeves. I decided to do layered sleeves, which will make it look like I’m wearing a kirtle underneath a short sleeved dress.

The long sleeves are made from a two piece pattern. The top part will be cut from stretch velvet so it nicely clings to the arm and the lower section is made from the damask print fabric with a gold mesh overlay. The short sleeves are made from a very similar pattern that is a bit wider and much shorter. Here are the patterns:

DSC_8619

I started by cutting out the short sleeves.

DSC_8620

The lower edge got turned inward by a half inch and sewed down.

DSC_8623

Then I made more of my piping/bias tape/ruffle combo which will decorate the hem.

DSC_8621

DSC_8622

That got pinned onto the hem of each sleeve.

DSC_8624

And sewn on by hand. All of this was done by hand because I wanted to avoid visible topstitching.

DSC_8629

The side seam got sewn up, then I sewed lining into each sleeve.

DSC_8638

This is the top part of the long sleeves, made from the same velvet I used on the escoffin. In the end the short sleeved layer will cover this part, so you won’t see it, but I wanted it to match anyway.

DSC_8625

These are the lower sections, made from the same fabrics as the sides of the escoffin. I still love this fabric combo,  I think it looks very rich and has a lot of depth to it.

DSC_8626

To finish the edges I stitched it onto a piece of lining with the right sides facing each other, then turned it the right way out. I topstitched around the sides (by machine) and hem (by hand), then it got sewn on to the velvet part.

DSC_8628

The side seam got sewn up and luckily they fit!

DSC_8630

Then the top edge was sewn inside the top edge of the short sleeves. That edge was a frayed mess so I finished it with bias tape.

I set them aside for a bit and sewed lining into the bodice. When that was done they got sewed in with a whip stitch.

DSC_8727

Which left me with a lovely wearable bodice!

DSC_8728

I’m really happy with this. I like all the fabrics together and it fits, so I don’t have anything negative to say about it at all!

DSC_8729

Now it was time to attach the skirt. I put the dress on and hiked it up a little bit so it fit loosely around the waist. I needed some extra room so I could take the dress in at the back so the terrible eyelets wouldn’t be visible.  Then I marked a line about one inch above my waist and cut across that point.

DSC_8730

I ripped out the boning and as much of the eyelets as I could. I cut about an inch off either side which got rid of half the eyelets, what was still visible I covered with bias tape.

DSC_8731

After it was sewn on you couldn’t even tell!

DSC_8732

Then I sewed the skirt to my new bodice with tiny whip stitches. And the bottom edge of the bodice lining was stitched down to cover the raw edge of the skirt.

DSC_8733

The skirt fabric is too weak for eyelets so I hand sewed in a zipper. It isn’t accurate, but it’s really convenient.

DSC_8739

And that was it! The dress is finished! I love how this turned out. It was a very spur of the moment project which makes the end result feel even better.

DSC_8734

Here are a few worn photos of the whole thing. I should have the entire set up soon but I have a bit of editing to do first!


DSC_9187edit

DSC_9209edit

DSC_9151edit

Thanks for reading!

 
 

Tags: , , , , , , ,

Making a Damask Print Medieval Dress, Part Three

 

This is another project that I forgot about for a while there. I’ve been so focused on new stuff that things I finished a few weeks ago have totally slipped my mind!

This is the third post about making my Damask Printed Medieval dress. Part one about this project is posted here, and part two is posted here.

Step one was cutting out all the skirt panels. Which was easy since this skirt is just a rectangle. And since my fabric is very wide I only had to cut out two panels to get the hundred and seventy inch width that I wanted. I think they were both around fifty one inches long.

The panels were sewn together with the wrong sides facing each other, then the seam allowance was trimmed and the fabric was folded and sewn with the right sides facing each other. This way the raw edge is hidden between the folds of the fabric and you’re left with pretty french seams!

DSC_7917

DSC_7921

For one side of the skirt I added strips of interfacing to the top ten inches of the edge. That got fused on, then the edge was folded inward by an inch. This will be the opening of the skirt that makes it easy to get on and off.

DSC_7913

That seam was also closed with a french seam, I tapered the stitching off once I got to the point where I wanted the opening to be.

DSC_7922

Once ironed it looked like this!

DSC_7923

Since I wanted to cartridge pleat the skirt I decided to back the top edge with a thick material. I’ve done this a lot and I always end up using strips of flannel, it seems to work the best for me!

DSC_7920

Those got folded in half and sewn onto the top edge. Then I pinned some home made bias tape over top to cover the raw edge.

DSC_7930

Which also got sewn on. These colors look so out of place against this fabric but I promise they aren’t visible in the end!

DSC_7945

I stitched a half inch away from the hem of the skirt, then I turned the fabric over at that stitch line and basted it down with loose running stitches.

DSC_7948

I marked a chalk line three inches away from the lower edge of the skirt, then turned the hem inward and pinned it so it touched that line.

DSC_7950

I sewed it down with a cross stitch because I was feeling extra patient that day!

DSC_7974

Then I switched back to working on the top edge of the fabric. I drew lines every three inches to create a guide for my cartridge pleats.

DSC_7976

I sewed over/under each marking I made to create 1.5″ deep pleats. I used upholstery thread for this to make sure it wouldn’t snap part way through. I’ve had that happen to me a few times and it totally sucks!

DSC_7980

I straightened out the pleats, then sewed through the back of them.

DSC_7983

And through the front of them, about a half inch lower than where my original gathering stitch was.

DSC_7982

I think they look pretty awesome at this point. So uniform and cool. But I regret making them this stiff and massive. They stick out too much and look a bit silly. I should have only used one layer of flannel. And less fabric.The skirt did not need to be this big.

Unfortunately this fabric is one that tears easily, and I knew needle marks would be visible all along the top edge if I removed the stitching and tried again. So I decided to stick with it and move forward.

DSC_7984

The skirt got pinned on.

DSC_7985

And whip stitched in place. That was pretty much it! The dress was done.

DSC_8793

Well, it should have been done. But I tried it on and really hated the sleeves…so I cut them off. I also removed the fur trim from the sleeves edge and sewed it around the arm holes instead. I much prefer it this way. I really liked how the bodice looked over my rose colored chemise, so I think i’ll pair this dress with that and let the chemises sleeves show. It isn’t accurate at all, but I think it will look nice.

DSC_8792

Even with the sleeve change i’m not super happy with this. It really didn’t turn out the way I wanted and i’m not sure why. I’m hoping to get some worn photos of it on Sunday, maybe i’ll like it better once it’s against a better backdrop!

Unfortunately I don’t have worn photos of it to share right now. The weather here has been stormy for the past week, which doesn’t provide enough lighting for indoor pictures.

I’m sorry I haven’t had very positive feelings about my last couple projects, they just didn’t work out that well in my opinion. But I recently finished two more things and I love how they’ve come out. And i’m really loving my current works in progress too, so I think my next couple posts will have happier endings!

Also! There is a video that shows the whole process. It can be watched here or below.

Thanks for reading!

 
 

Tags: , , ,

Making a Medieval Escoffin / Heart Shaped Headpiece

Last week I decided to make a Medieval Escoffin. They are a tall, usually elaborate, heart shaped headdress with a padded roll on top. I thought it would be a fun little project and unlike any of my previous headpieces.

The finished piece looks like this – I’ll be taking better photos of it when I have the matching dress finished.

Photo on 10-19-15 at 3.18 PM #4

I’ve seen these headpieces in a lot of paintings and etchings, though they are usually just called heart shaped headpieces or heart shaped hennin. Fig. 50 from the page below was my main inspiration for this, since I thought the slightly wider shape would be more flattering on me than the completely upright ones (like Fig. 51). I didn’t intend for mine to look so similar to the drawing, it just sort of worked out that way.

Also this isn’t to go with the Damask Medieval Dress I’ve been working on – I just borrowed some materials from that piece.

DSC_8046

Oh, and those drawings are all from this book. It’s really great for seeing the styles from various periods but it doesn’t have any information on the patterning or making of any headdresses. Which is totally fine with me – I like making that part up on my own.

DSC_8047

I started doodling what the pattern might look like flat. Once I realized the curves in the headpiece could be created by adding batting to a flat pattern this became way easier.

My first  few sketches kind of look like the Modius crowns from Ancient Egypt – in fact the shape of a lot of early European headpieces remind me of ones Egyptian Royalty wore. Which I wouldn’t have expected.

DSC_7988

 I started by drawing out the shape I thought it would have on newsprint. The right side is what it looked like originally and the left side is the one I altered. I took it in a lot, lowered he top arch, and raised the bottom. Then I drew out the various sections onto the newsprint so I could better visualize the proportions.

I kept holding it up to/putting it on my head and adjusting things until I liked the way it looked. It was surprisingly easy!

DSC_7989

This is the pattern I ended up with. But I ended up raising the bottom portion since it was lower than I wanted.

DSC_7990

I traced the pattern onto heavy felt weight interfacing and cut it out. I also drew on the separate sections so I would know where to put the padding.

DSC_7991

Then I hand sewed wire around each edge. This makes the headpiece a lot more durable and shapeable. For the lower edge I stitched the wire about a quarter inch away from the edge. This will help reduce the bulk at the there, which is good since a lot of fabric will be layered there.

I also tried it on at this point to make sure everything looked okay – and it did, so I carried on.

DSC_7992

Then it was time to pad the lower section (I’ve been calling these the “ears” but there is probably a proper name for it). I used circles of quilt batting which I cut up and layered until I had a nice rounded shape.

DSC_7993

Here they are pinned on. I whip stitched the edges down shortly after taking this picture.

DSC_7995

Then I covered the ears lower section with a damask print fabric. To jazz this fabric up a bit I covered it with a gold mesh – the damask fabric is from NYC and the mesh is from Joanns.

DSC_7996

DSC_7998

Then I sewed some home made brocade piping across the bottom edge. And I covered the lower edge of the felt interfacing at the centerfront with a scrap of red fabric. This part will eventually be hidden by a ruffle but I didn’t want the felt to be visible from any angle.

DSC_7999

Here you can see the textures of these materials together, I really, really, love the combination.

DSC_8000

I decided to line the interior before doing anything else. I used some red suiting for this.

DSC_8003

Then I tried it on. I was happy with the way it was looking but I thought the lower panels looked a little empty.

Photo on 10-13-15 at 2.33 PM #2

So I started fiddling around with some beads and I realized I had enough of these gold glass beads to embellish the lower panels with a cross pattern.

I got these from Michaels (or maybe Joanns?) the pack of gold ones was on sale for $2. I also decided to stitch fake pearls across the bottom of the panels. For that i’m using super cheap 6mm ones by darice, I think these are 99c a strand.

DSC_8012

I made up a paper template for the cross pattern, which looked like this.

DSC_8004

I pinned them on and traced the edges of each strip with a yellow copic marker. If I did this again I would definitely draw this pattern onto the fabric before sewing the fabric over a dome. Because that make it way more difficult and the design isn’t even on both sides, which is a bummer.

DSC_8005

DSC_8006

Taking the fact I was trying to draw straight stripes on a dome into account, I think this looks pretty good!

DSC_8007

But I still wanted it to have more details. So I decided to add a little ruffle. I had pink, red, and ivory chiffon, but none of them looked quite right with the damask material. I found this orange chiffon at the bottom of the stack and thought it was perfect, so I cut it into strips which got folded in half to create a finished edge.

DSC_8008

I gathered that down and sewed it onto the escoffin. It looks a bit silly, but I was happy with it.

DSC_8013

I started doing a little bit of the beading, as you can see on the right side. But the major difference here is the addition of batting to the top portion of the headpiece. This is seriously just a giant rectangle of quilt batting that I folded three times. Then it was pinned and draped inside the guidelines I had drawn.

DSC_8015

Here it is after being sewn down!

DSC_8016

Now I came to a little roadblock. I had no idea what fabric to use to cover the top portion. This is a spontaneous project, so I didn’t buy any materials with it in mind, I’m just using things I have around.

I figured if the fabric stretched that would give a smoother finish, and the only stretch fabrics I have are stretch velvets. So I raided that bin and luckily came across scraps of red velvet that I used for the cloak on my Christmas Costume in 2013.

I had just enough to cover the top portion. It took a lot of pins, stretching, and pricks to get it to lay smooth but I managed!

DSC_8019

I had to cut centerfront to get it to lay flat. I didn’t want the raw edge to show so I covered it with a scrap of velvet.

DSC_8017

DSC_8018

With the assembly done I went ahead and finished the beading.

(I did this well watching American Ninja Warrior – that show is really addicting)

DSC_8035

DSC_8037

The last thing to do was add a gem to the front. I don’t actually have any gems, but I do have glass montees. I used a clear one and painted it with alcohol inks until it was a rich gold that matches the other materials used. Then I glued gold beads around the edge and set it into one of the brass cameo frames I got in NYC a few weeks ago.

I think it’s super pretty!

DSC_8039

That got sewn onto the center front.

DSC_8041

DSC_8042

Then I did up the back and it was finished!

DSC_8043

I love how this turned out. It’s one of my favorite pieces i’ve made in a while.  That is probably  because it’s so different from any of my other pieces. But I also really like all these materials together, I think they look quite stunning.

And this was really fun to make, which  raises my opinion on it. I love figuring stuff out without any information other than what the finished thing should look like, and I definitely got to do that with this. So that was great.

No photos from the back yet. I think i’ll make a veil to hide my hair, because right now it’s visible from the back and doesn’t look great.

Photo on 10-19-15 at 3.18 PM #4

Photo on 10-19-15 at 3.20 PM #3

Photo on 10-19-15 at 3.21 PM

Cost Break Down:

1/4 yards of:  velvet, damask fabric, gold mesh, chiffon, and suiting = $6

1/2 yard of interfacing & quilt batting = $5.00

Beads, cameo frame, glass montee = $6.00

It probably has fifteen hours of work into it. Maybe twenty. I was pretty damn focused on it for three days, and by the fourth day it was finished. But all the work was fun, I really enjoyed this project!

Thanks for reading!

 

Tags: , , , , , , , , ,

Making a Damask Print Medieval Dress, Part Two

It took me almost a month to get to this point, but it’s finally time to talk about the sleeves for this dress! I’m not sure why this project has dragged on so long, it’s such a simple design. But it’s almost done now! Which is great because I have new projects I want to get started on.

Part one of making this costume can be read here, and a video about making the sleeves is posted here!

This is one of the sleeves cut out. The hem is thirty inches long which is pretty massive for sleeves!

DSC_7054

Speaking of hems, they got turned under by three quarters of an inch and sewn down by hand.

DSC_7065

The back seam was sewn as a half inch french seam. Even though these sleeves will be lined this fabric frays so much that I felt this was necessary.

DSC_7072

I took a minute to rest the sleeves on the dress form and they actually looked pretty good! I really like the shape.

DSC_7074

I pinned the fake fur trim onto the hem of each sleeve then sewed it on with a slip stitch. I whip stitched the fur together at the back instead of seaming it, which worked surprisingly well, you can’t even see it. I did this because the fur is super thick and I didn’t want to add the bulk by sewing it as a regular seam.

DSC_7077

DSC_7078

Now it was time for the lining. I cut the lining out using the same sleeve pattern. They were cut from the really thin cotton which was also used to line the bodice.

DSC_7068

I also cut out two 2″ wide strips of cotton, which were cut on the fabrics bias. Then the edges got folded inward to create one inch wide bias tape.

DSC_7069

Then the back seam was done up. This pattern had a one inch seam allowance included so the top layer could be sewn with a french seam. But the lining doesn’t fray much at all, so I sewed it as a regular one inch seam.

DSC_7071

The lining was tucked inside the sleeve and they were sewn together at the top edge. After I did that I realized I had forgot something kind of important – the opening on the right sleeve. Without this you can’t actually get into the bodice…

So I pulled out my seam ripper and opened the top three inches of the sleeve. I ironed the edge so it was folded over and repeated the process with the lining. Then I whip stitched the lining around the opening to keep it in place. This opening lines up with the laced side of the bodice and gives enough room for the bodice to get over my shoulders.

DSC_7081

With that fixed, I carried on by sewing the bias tape onto the tops of the sleeves. This was done just to cover the raw edge.

DSC_7085

The bottom edge of the lining was folded inward and pinned to the top edge of the fake fur trim.

DSC_7087

It got sewn down with whip stitches and the sleeves were done!

DSC_7089

DSC_7090

Here they are on the dress form. I think the fur trim should be a little wider, the proportions are a little weird in my opinion. But it’s being used as trim, not as a cuff, so I think it’s okay. I was originally worried about how the fur would look with this fabric, since there isn’t much contrast it could have really clashed. But I’ve decided that I like the combination, so that’s good!

DSC_7091

The sleeves got gathered slightly at the top, then sewed to the bodice. The seam allowance at the sleeve tops got whip stitched to the lining so the interior looks super smooth.

DSC_7685

The outside looks pretty okay too!

DSC_7687

DSC_7689

I like how this is coming out, and i’ve liked working on it, but i’m kind of over it. I have so many future plans (a couple which are from a similar time period) and i’m itching to work on those. So i’m a bit fed up with this project even though it’s going smoothly. Luckily it should be done soon, then I can start on wonderful new things!

Thanks for reading!

 
 

Tags: , , , ,

Making a Damask Print Medieval Dress, Part One

This is my first time blogging about a historical project in a while! I’ve missed it. Historical projects are definitely my favorite and i’m happy to be back to focusing on them.

This is a dress inspired by (and based off the shape) one Eleanor of Portugal, the Holy Roman Empress wore in this painting, which is by Hans Burgkamair the Elder. I love how unusual the style of this dress is. The simplistic design was very common in the Middle Ages, but the fuller sleeves and skirt hint at the Renaissance fashions which were just starting to become popular.

I like a lot of the more traditional medieval styles (close fitting and a lot of layers) and plan to make things similar to them in the near future, but the uniqueness of this design made me want to recreate it. I’ve decided to drop the laced collar, but the shape and neckline will be similar. I found a drawing (which is probably not very historically accurate) with similar sleeves which i’ve also used for inspiration.

DSC_6195

I would also like to pair it with a headpiece of some sort. Not sure what exactly, but it’ll be elaborate.

DSC_6196

My materials consist of four yards of a gold and orange damask print. I bought this in NYC but found this website which sells it for almost the same price. I also have some fake fur trim to edge the neckline and sleeves.

I’m going to alter pieces of a  failed red medieval ensemble and use them for the chemise/underdress. That is what the red fabric represents.

DSC_6348

I have some matching red beads, rhinestones, and gold beads which will probably end up in the headpiece. I read that mesh overlays were very common on hennin so I bought some on my last trip to joanns. I also picked up four yards of quilting cotton, which will be the lining.

DSC_6349

I think that’s everything – lets move onto making it!

The bodice i’m basing this off of does not have seams or darts in the front. Which means mine won’t either. That design element paired with the high neck meant I couldn’t drape this pattern on my dress form (its bust is bigger and doesn’t squish into flat front bodices). I ended up using the “pillowcase and pin” method which I show in this blog post.

When that was done It looked like this.

DSC_6676

I did my best to make sense of the markings and create something a bit easier to transfer onto paper.

DSC_6678

I ended up with this! But I made some alterations to this after creating a mock up. One of those changes was separating the pieces, since I wanted the centerfront and centerback to be cut straight with the damask print. I couldn’t get the front and back to line up while still cutting the bodice as one piece.

I also lowered the neckline, waistline, and took in the shoulder seam.

DSC_6680

I drew a chalk line down the backside of the fabric. I made sure the line went right down the center of the damask print and laid the pattern piece against the chalkline. I traced around the edges with sharpie and repeated the process with the other side. Then I cut the pieces out and labeled them because the front and back look really similar.

DSC_6888

I didn’t want a back closure so I decided to have eyelets going up one side. I added two and a bit inches on the sides with the eyelets. The other side has a three quarter inch seam allowance.

DSC_6889

Somewhere along the way I decided to bind the seams instead of sewing them the normal way. To make that a little bit easier I added a medium weight interfacing where the binding would be. On the side with the eyelets I used a lighter weight interfacing, this was to prevent fraying more than anything else.

This fabric is REALLY prone to fraying,  so I left the bottom edge (the waistline) uncut while I worked on the neckline and side seams.

DSC_6891

To get super smooth finishes on the edges (and so I wouldn’t have to worry about fraying) I made facings for the neckline and armholes. I traced the edges of the bodice onto my lining fabric, then measured one and a half inches away from the traced edge. These got pinned on with the right sides facing each other.

DSC_6893

I sewed a half inch away from the edge at the armholes, and three quarter inches away from the neckline since I made it the tiniest bit too high.

DSC_6897

The facings got turned over and pinned down…

DSC_6898

Then sewn down by hand to prevent any topstitching from being visible on the front of the fabric.

DSC_6901

With those edges finished, I moved onto the side seams. I started with the side that has eyelets.

I turned the fabric inward by three quarters of an inch and sewed half an inch away from the edge. Then folded the fabric inward by one and a quarter inch and sewed half an inch away from the edge. I topstitched a sixteenth of an inch away from the edges to secure it in place. This created two boning channels about three quarters of an inch apart. The math there doesn’t really make sense when I think about it, but I swear that is what I did!

It looked like this.

DSC_6903

I added the boning and prepared to sew sixteen eyelets.

DSC_6906

At this point it still kind of fit on my dress form. Okay not really. But you can get some idea of what it’ll resemble.

DSC_6908

DSC_6909

Now I did the eyelets. They took maybe five episodes of Treasure Quest: Snake Island to finish. That is how I measure time when hand sewing in front of the TV and it is totally valid.

DSC_6912

DSC_6910

I ironed the other side edges into a fold, then bound them together from the back.

DSC_6914

DSC_6917

A fitting made me realize having boning on one side and not the other was a bad idea. The side without boning collapsed and puckered. If I’d realized this before binding the seam I could have hidden boning in the seam allowance, but it was too late for that. So I sewed an ugly boning channel instead.

It’s so ugly. But it works.

DSC_6918

I made up some double fold bias tape out of scraps.

DSC_6915

The lower edge finally got cut to the right length, then bias tape was sewn overtop to hide the fraying.

DSC_6920

DSC_6922

 I cut out my lining (all as one piece) and pinned it in place. I sewed it down at the waistline, sides, and the lower half of the armholes. It’s much easier to sew lining in when the garment is flat, so I didn’t sew up the shoulder seam until most of the lining was in.

When everything but the lining around the neckline and shoulders were done, I did up the shoulder seam.

DSC_6926

But I still didn’t finish sewing the lining in. I had to attach the fur first!

DSC_6927

I did that with a whip stitch, then finished sewing in the lining.

DSC_6931

DSC_6932

DSC_6933

And that’s it for the bodice! It needs sleeves and a skirt but that will come later. Here it is worn over my rose chemise I made a few months ago. I should have tied the cuffs but I forgot.

The fit could probably be a little bit better, but i’m pretty pleased with it considering how hard it is to make fitted bodices without darts or seams. It also doesn’t have any boning or interfacing (aside from the sides) in it and is worn without a foundation garment. The skirt will weight the bodice a bit and make it lay a little smoother, which will help.

I think I might add some red pearls around the neckline, just below the fur. But I also like how simple it is, so i’m conflicted. Opinions on that are welcome!

DSC_7026

DSC_7029

Oh, and I filmed the process of making this. If you want to watch that, it can be seen here!

Thanks for reading!

 

Tags: , , , , , ,

Making a Rose Colored Chiffon Chemise

I’m not sure what happened this week, I ended up not blogging for some unexplainable reason. But today i’m back and i’ll be talking about making a simple chemise from chiffon!

I picked up this china rose colored two tone chiffon many months ago because I fell in love with the color. None of my projects this year have required anything like it so it has sat around collecting dust. For my newest design  I needed a chemise to wear under a maroon middle ages inspired dress I knew I had finally found a project for this material!

I paired it with a colorful brocade, the same fabric was used to trim the dress i’m pairing this chemise with.

I only had three yards of this fabric which wasn’t really enough so I had to use my fabric sparingly. I cut my fabric into three pieces, the first was the smallest and was used to make sleeves, the next was the front of the chemise, and the last was slightly longer to create the back of the chemise. Since I didn’t have enough fabric to make a full length version I decided a high low hem was as close as I could get.

Before I could do much with chiffon I made the patterns for the collar and cuffs. On the left is the pattern I made for the chemise, the one on the right is for the matching dress.

DSC_9737

The cuffs were just rectangles with seam allowances added in. Once the paper patterns were done I went ahead and cut the pieces from brocade.

DSC_9738

I also used the pattern to cut a layer from white cotton, which will eventually be used as lining. Once all the pieces were cut out I marked the edges and hemmed them.

DSC_9793

When those were finished it was time to make the dress. The two rectangles I cut for the body of the dress got sewn together with french seams. Then the garment was hemmed – i’m still really bad at hemming chiffon, it never turns out well!

I only have a photo of the first step in hemming this, the fabric was turned under a quarter inch and stitched in place with large basting stitches. Then I rolled the hem and secured it with a whip stitch, which isn’t shown below.

DSC_9794

I used a small running stitch to gather the chiffon down

DSC_9795

The majority of the raw edge will be covered by the collar lining, but the parts that will hang down to create sleeve holes won’t be covered. So I stitched lace over the tops to keep them from fraying.

DSC_9796

Then I sewed the dress onto the collar!

DSC_9797

This is what it looked like on a dress form. It’s not a very good color representation but you can see the length!

DSC_0281

Now it’s time to talk about the sleeves! I drafted a really simple boxy pattern for these. I would have liked to make them wider and fuller but I was working with fabric limitations.

DSC_9800

The sleeves were gathered at both ends, then lace was stitched across the tops to prevent fraying.

DSC_0280

The lower edge got sewn on to my little rectangle cuffs!

DSC_0278

The side of the cuff and lower two inches of the sleeves were hemmed. The sleeves will close with a french seam but also have an eyelet at the wrist.

My hands are way to fat to make it through a cuff that matches my wrist measurement, leaving the lower two inches open prevents me from having to attempt it.

DSC_0279

I sewed in the cuff lining, added the eyelets, and my sleeves were almost done!

DSC_0339

All they needed were french seams, then they were ready to be attached to the dress.

DSC_0340

I sewed them in place with a whip stitch. From the outside the dress looked okay, but the inside was a bit of a mess!

DSC_0341

DSC_0342

I trimmed the worst of the fraying, then sewed the lining in place.

DSC_0343

I had originally planned on adding eyelets at the back of this chemise, but I can pull it over my head without any problem, so that wasn’t necessary. All I did to finish this off was sew up the back with a french seam!

DSC_0345

This was quite the easy little project. I dislike working with chiffon so I wouldn’t call it fun, but i’m happy with how it turned out!

Thanks for reading!

 
7 Comments

Posted by on November 13, 2014 in Medieval, The Making Of

 

Tags: , , , , ,