RSS

Tag Archives: beetlewing

Making an 1860’s Beetlewing Dress, Part One

If you clicked on this post thinking that title is an exaggeration, then you have severely underestimated me and the things I will buy on etsy.

I discovered beetlewing embroidery several years ago, when I was still really active on tumblr and this picture came across my dashboard. I thought it was stunning, and the fact that all the detail work was made from bugs fascinated me. But at the time I wasn’t doing a lot of hand work, and it never crossed my mind that I could make anything similar.

Over the past few months I’ve come across pictures of more extant garments that feature this technique. And after my tiny embroidery project earlier in the year (a stomacher), and an elaborate 1860’s dress under my belt,  I felt like I could actually take this on.

Beetlewing embroidery goes back hundreds of years, and from what I can tell, originated in China, Thailand, and India. I’m not sure how it came to be popular in Europe in the mid 1800’s, but it was, and the results are stunning. This pinterest board has lots of lovely examples.

My first “step” was buying the wings. I ordered 2,000 from this seller, which I’m really hoping will be enough.

The wings feel (and look) a bit like press on nails, but are a bit thicker and more brittle. Though they are wings, they aren’t like dragonfly wings – these are a firm shell.

A few other bloggers have made dresses featuring them, and they mentioned steaming the wings to make them flexible enough to poke holes in, where others used drills. I found this prospect kind of terrifying because I had a lot of wings, but luckily mine haven’t required either method. A sharp (large) needle goes through them and creates a big enough hole to get a smaller needle and a few strands of embroidery floss through.

The more time consuming part has been cutting off the point where the wings connected to the body of the beetle. It’s also sort of gross even though it’s all dried out.

As for fabric, I’ll be using 12 yards of lightweight cotton which I got from Hamed Fabrics.

The design isn’t fully figured out yet, but I know it will consist of a skirt, an evening bodice, and a day bodice. Which is very common for designs in the mid 19th century.

My inspiration for the bodice shapes, and the sleeves, is this ensemble – the skirt design is still kind of a mystery, but I’ll figure it out once the upper half is done. The embroidery pattern is made up, but influenced a lot but every other example I could find online.

The first step was draping – draping loose fitting bodices is always a pain, but I did the best I could.

I tried to change it up a little bit, so instead of the shoulder seam sitting at the top of the shoulder, it’s further back and gathered to add volume to the bust.

Here is one of the front pieces, with the shoulder gathered.

The back pieces, stitched together with french seams.

And here they are sewn together.

The side seams were done up as well, then the collar and hem were bound with bias tape made from green silk shantung. The front edges were also turned inward to finish them off nicely.

Now for the fun part – the beetles! I designed the embroidery pattern on paper, and fiddled around with the wings until I liked the shapes they made.

The paper was then placed underneath the fabric. I traced the stem design onto the right side of the fabric with a wash away pen.

And then the embroidery began! I didn’t do a great job documenting this, since I wasn’t sure it would work. I’ll make sure to take more photos of the skirt during these steps.

The stems were sewn with a split stitch. I outlined each one with two parallel lines of stitching, with a small gap between them, which is where I sewed gold seed beads. Then the wings were sewn on, and the “gaps” between the wings, as well as the base of them, were covered with green seed beads to make them look more like foliage.

I did as much of this as I could with a hoop.

  Then I sewed sequins around the design – a mixture of flat gold ones, faceted gold ones, and some that match the wings almost perfectly. 

Here is one section done!

However when it was all done, it felt a little sparse. So I added bugs. The bodies were made from embroidery floss and gold beads, with the beetle wings making up the wings. Then I embroidered on antennas and used faux black pearls as eyes.

I may make a video showing this process at some point!

After the embellishing was done I sewed in hook/bar closures, and gathered the waistline. However after a fitting I realized the waist was too small, so the gathering was ripped out and re-done.

Now time for the sleeves! It looks like a relatively normal sleeve pattern, but the twist is a rectangle gathered every 4″ to create puffs, which is sewn between these two pieces.

The top piece is the front (ignore the writing saying otherwise) – it’s narrower, so the puffs are more visible from the front and side of the sleeves when they are worn.

Here are the puffed portions after being gathered.

I sewed them onto a smaller piece of material so they held their shape.

Then that was sewn to the other pieces.

They looked okay, but were obviously missing bugs.

(I will never say that about anything else if my life)

I placed the bugs in the center of the gathering points, surrounded by sequins.

The side seam was done up, but I left the bottom few inches open to allow me to get the sleeves on and off. Then I turned the seam allowance inward with whip stitches to hide the raw edges.

The cuffs are made from interfaced cotton, with green silk piping trimming the edges. They are lined with more cotton, and close with two hooks/bars. Weirdly, these gave me a lot of trouble. I cut them the wrong length the first time, and had to re-do them. Then I gathered the sleeves to be too small and didn’t realize until after the cuffs were sewn on and the lining was in…cue me having to re-do it, again.

Here you can see the difference between the front and backs of the sleeves.

They were sewn on by machine, and that’s it!

And here are some worn photos – I don’t love the fit, I feel like it should be a little looser to provide more mobility of the arms. But I also really like how it looks.

(note, the ribbon is a placeholder to imitate the waistband of the skirt, it isn’t part of the bodice)

I think the proportion of the embroidery at the front is really nice, and I love the sleeves, the bugs with the gathering is really charming to me.

One things I’ll have to do before labeling this costume complete is make a corset cover. My corset is bright red, which doesn’t pair well with sheer white fabrics.

And that’s it! I’m not sure when the next post about this project will be done, since the skirt isn’t even started and the evening bodice is missing sleeves. But hopefully it will all come together nicely in the near future!

Thanks for reading!

Advertisements
 
30 Comments

Posted by on May 31, 2017 in 20th Century, The Making Of

 

Tags: , , , , , ,